Showing 161–176 of 333 results
-
Bond It Astro Pro
REF:
REF:
Description
Advanced Modified Polymer High Tack Seaming Adhesive For Artificial Grass Surfaces. Astro Pro is a superior adhesive suitable for use inside and out, in all weather conditions. Has excellent bonding properties even on wet surfaces. Rapid cure time even at low temperatures. Remains fully elastic. Can be applied to wet surfaces; Solvent-free and odourless; Fast tack and rapid cure time; Non-shrinking and permanently elastic; Simple application; Ideal for maintenance and repair work. Colour: Green. -
Bond It Bitubond Bitumen Paint
REF:
REF:
Description
A solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Suitable for drinking water tanks as it forms an odourless and taint-free bitumen film coating.What the experts have to say
Bitumen PaintPreparation TipThoroughly clean surfaces to be treated. Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer. Surfaces to be treated must be completely free of water. -
Bond It Dust Proofer & Hardener
REF:
REF:
Description
A premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Suitable for use on garage, warehouse, factory or workshop floors. Application Gloves, boots and goggles should be worn at all times during application. Ensure all surfaces are clean, dry and free from oil, grease, paint or polish to maximise the effectiveness of this product. If in doubt use Bond It BRICK & PATIO CLEANER to remove any stubborn stains before washing down and applying Bond It... -
Bond It Flash-Mate Lead Sealant
REF:
REF:
Description
A fast skinning roofing sealant that reduces weather ingression, tile lift and noise. Tough, resilient and compatible with lead. Conforms to EN15651-1;F INT. Flash-Mate Lead Sealant can be used to bond glass and glazing plastics as well as small sections of roofing materials under repair. Ideally suited for sealing roof-lights, conservatives, soffits, glass house, industrial roofing systems, lead flashings and to prevent tile lifting and wind noise. -
Bond It Mega Foam
REF:
REF:
Description
A high performance, polyurethane expanding foam A high performance, polyurethane expanding foam available for use as an aerosol grade using patented adaptor or by simply fixing a gun applicator can be used as gun grade. Quick, economic and easy to apply for fitting doors, windows and insulating pipes and filling gaps. Improves draught and heat insulation and deadens noise. Fitted with new, unique valve which allows for multi-directional use. Mega Foam exceeds DIN4102 Class B3 (Foam rating for products with no fire resistant additives or... -
Bond It Organic Cleaner & Degreaser
REF:
REF:
Description
A non-flammable, non-abrasive, user friendly, general purpose cleaner and degreasing agent with citrus aroma. -
Bond It Rapid-Flex
REF:
REF:
Description
A one-part, rapid setting, flexible floor and wall tile adhesive for professional use. Suitable for all types of ceramic floor and wall tiles, including mosaics, porcelain, natural stone and vitrified tiles. Conforms to: EN12004 Type C2F.What the experts have to say
Rapid-FlexApplicationIdeally suited for application onto timber panels, wood floors, plywood, composite boards and impermeable surfaces, such as existing quarry tiles, mastic asphalt and power-floated concrete without the need to include a flexi-additive in the mix. Also suitable for use in areas with limited movement or vibration including underfloor heating. -
Fortessa Apollo
REF:
REF:
Description
Apollo is a distinctive and stylish door lever on rose that underwent specialist lacquer treatments to provide a high resistance to shocks and abrasions and to help mentain its natural shine long into the future. All Fortessa products undergo thorough testing at all stages of manufacture, and performance of all working parts is rigorously tested. Round rose Meets DIN EN 1906 Interior Residential classification standards Manufacturer’s Warranty: 10 yearsWhat the experts have to say
Fortessa ApolloDoor Lever on RoseFortessa Door Handles are covered by a 10 Year Guarantee on mechanical parts. Our levers have been tested to pass DIN EN 1906 European Quality Standards, and have been tested for frequency of use. Essentially each door handle is guaranteed for 100,000 revolutions. -
PermaBase Screws
REF:
REF:
Description
Screws to Use with PermaBase® Cement Board PermaBase® Screws are corrosion resistant screws specifically designed to be used with PermaBase Cement Boards. The are used to attach PermaBase Cement Board to wood or steel studs, plywood subfloors, ceilings and countertops. -
RADEX Radon Tape
REF:
REF:
Description
Sealing joints in the radon membrane How important is Radon Protection System? Radon, a radioactive gas, occurs naturally in Ireland and the country contains some of the highest radon levels in the world. Laydex provides the complete radon protection system: Radon Tape, Top Hat, Laydex Sump, Gas Resistant Self-adhesive Membrane, Gas Resistant DPC, Gas Primer and Quick Drying Liquid Radon Barrier. -
Tyvek® Acrylic Tape with split-release liner
REF:
REF:
Description
Single-sided DuPont Tyvek® tape (HD-PE) with modified acrylic adhesive and a paper split-release liner. The tape is suitable for sealing membrane laps, but particularly suitable for making good around penetrations and for damage repair for most Tyvek® Underlays and Vapour Control Layers. -
VISQUEEN Protect & Drain
REF:
REF:
Description
High Performance Protection and Drainage Medium Visqueen Protect&Drain consists of a geotextile filter membrane thermally bonded to a cuspated HDPE core. The product is 6mm thick and supplied in easy to handle rolls: 0.97m x 25m. Complete range for various site conditions. For high water risk sites we recommend the use of Visqueen Protect&Drain 25mm. -
Bond It Cove-Mate Coving Adhesive
REF:
REF:
Description
A high strength, solvent-free, gap-filling, coving and decorating adhesive. Quick grab and suitable for interior coving and decorative mouldings. Can replace mechanical fixings in a multitude of home improvement applications. Dries to a white finish and can be over-painted once dry. Uses Bond It COVE-MATE is ideal for fixing polystyrene and PU covings, skirting boards, architraves and dado rails, etc. It can be used internally on plaster, brick and stone. It is also suitable for bonding work tops to base units and for bonding cork... -
Bond It Expanding Foam Gun Cleaner
REF:
REF:
Description
A dual purpose, solvent-based solution for effective cleaning of expanding foam applicator guns and removal of wet/uncured foam. Regular cleaning is essential in order to prolong the service life of the applicator and optimise foam delivery. Attaches to standard foam applicator guns. -
Bond It Felt Adhesive
REF:
REF:
Description
A cold applied, solvent-borne, heavy-duty adhesive for bonding all types of bituminous roofing felts to asphalt, felt, metal and concrete. It can be used for bonding mineral chippings to bituminous surfaces. Note: It may not be used over tar based products. -
Bond It Frost Proofer & Rapid Hardener
REF:
REF:
Description
A high performance building chemical that increases frost resistance and accelerates setting time of cement by improving the rate of hydration. Specially developed for brick laying and rendering, etc. at low and sub-zero temperatures. Added to the mix, this product will improve workability and increase strength gain and resistance to water penetration. It allows up to a 15% reduction of gauging water, and can also reduce curing times and shrinkage. Will not degrade steelwork or wall tiles as formulation is chloride-free. Conforms to: EN934-2 (2009)
