Show categories

Showing all 7 results

  • Bond It All Weather Roofing Compound

    REF:
    A general purpose, waterproof coating for all common roofing surfaces
    REF:

    Description

    A general purpose, waterproof coating for all common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, fibre/cement, slates, lead, copper, tin and zinc. Excellent adhesion to damp surfaces, resistance to extremes of temperature and does not crack in the cold or flow in the sun. Recommended where the threat of frost or rain precludes the use of an emulsion. Can be over coated with a suitable decorative solar reflective paint to prolong the life of the coating. Preparation All surfaces must be structurally sound,...
  • Bond It Bitubond Bitumen Paint

    REF:
    A solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete
    REF:

    Description

    A solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Suitable for drinking water tanks as it forms an odourless and taint-free bitumen film coating.

    What the experts have to say

    Bitumen Paint
    Preparation Tip
    Thoroughly clean surfaces to be treated. Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer. Surfaces to be treated must be completely free of water.
  • Bond It Felt Adhesive

    REF:
    REF:

    Description

    A cold applied, solvent-borne, heavy-duty adhesive for bonding all types of bituminous roofing felts to asphalt, felt, metal and concrete. It can be used for bonding mineral chippings to bituminous surfaces. Note: It may not be used over tar based products.
  • Bond It Rubber Bitumen Emulsion

    REF:
    REF:

    Description

    A Solvent-free, Rubberised Bitumen Emulsion Bond It Rubber Bitumen Emulsion dries to a tough, black coating providing a highly effective cold-applied, damp-proof membrane in sandwich constructions. It can also be used as a waterproof for floors, walls and other above ground structures and acts as a curing membrane when applied to green concrete. It is equally effective as an adhesive for wood blocks, wood mosaic panels, insulation boards, expanded polystyrene and cork panels, or as a plaster bonding agent on difficult surfaces. It can also...
  • Bond It Trowel Mastic

    REF:
    A multi-purpose, trowel grade material for waterproofing, stopping, bedding, pointing and sealing.
    REF:

    Description

    A multi-purpose, trowel grade material for waterproofing, stopping, bedding, pointing and sealing. Can be applied to most common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, cast iron, fibre/cement, slates, lead, copper, zinc, concrete and timber. Fibre reinforced making it ideal for filling cracks and holes and cures to give a strong and flexible compound.
  • Bond It Bitubond Primer

    REF:
    A Highly Penetrative, General Purpose Bitumen Primer
    REF:

    Description

    A Highly Penetrative, General Purpose Bitumen Primer A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.

    What the experts have to say

    Bitumen Primer
    Application Tip
    Apply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.
  • Pluvitec Pratiko Mastic

    REF:
    REF:

    Description

    A Flexible Bituminous Mastic PRATIKO MASTIC is a flexible bituminous mastic reinforced with synthetic fibres which, once dry, forms a plasticized layer with excellent adhesion. PRATIKO MASTIC has an excellent adhesion and durability on bituminous surfaces, galvanized sheets, smooth and corrugated metal sheets, concrete, fibre cement, etc. which remains constant in time. The product has excellent resistance to aging, U.V. ray and atmospheric aggression. PRATIKO MASTIC can also be applied at temperatures below 0°C, on slightly humid surfaces and is compatible with all types of...

Questions? Please contact us

Or submit our contact form