|   
Show categories

Showing all 4 results

  • Pluvitec Specialtec P 3 mm

    REF:
    Pluvitec Specialtec P 3 mm - an APP modified bituminous waterproofing membrane
    REF:

    Description

    Modified APP Waterproofing Membrane Pluvitec Specialtec is an APP modified bituminous waterproofing membrane with both composite polyester and fibreglass reinforcements providing both good mechanical characteristics and excellent dimensional stability. Specialtec P 3mm is the underlay in our fully Pluvitec warranty backed build up.
  • Pluvitec Plusgum

    REF:
    Pluvitec Plusgum - a fibre glass reinforcement
    REF:

    Description

    Pre-fabricated waterproofing membrane made of distilled bitumen and elasto-plastic polymers (APP) having a woven non woven single strand composite polyester reinforcement, which provide the membrane with high mechanical characteristics and excellent dimensional stability. The V versions have a fibre glass reinforcement, with excellent dimensional stability. The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 10 cm and upon request a head selvedge of 15 cm, to improve adhesion between the...

    What the experts have to say

    Application Tip
    Plusgum
    Apply by torch application a 25 cm strip of membrane reinforced with polyester along all vertical up stands. To have all overlaps with the slope, position the membrane always starting from the lowest point.
  • Pluvitec Ultratec

    REF:
    Pluvitec Ultratec - an APP modified bituminous waterproofing membrane
    REF:

    Description

    Modified APP Waterproofing Membrane Pluvitec Ultratec is an APP modified bituminous waterproofing membrane with a single strand composite polyester reinforcement providing very high mechanical characteristics and excellent dimensional stability.
  • Index SIRIO Polyester

    REF:
    Index Sirio Polyester - are made up of distilled bitumen
    REF:

    Description

    The SIRIO membranes are made up of distilled bitumen, selected for industrial use, with  elastomeric and plastomeric polymers added to obtain a phase inversion compound whose continuous phase is formed by polymers in which the bitumen is dispersed, where the characteristics are determined by the polymeric matrix and not by the bitumen even if this is the most consistent ingredient. SIRIO Polyester and MINERAL SIRIO Polyester are reinforced with a rot-proof “non woven” polyester fabric composite, stabilized with fibreglass mat which is very strong and elastic with optimal dimensional stability in hot conditions which reduces the problems of the banana...

    What the experts have to say

    Embossing
    Flamina
    The embossing on the lower surfaces of the membranes finished with Flamina film makes it possible to lay the product precisely and quickly; forming a smooth surface when melted with the torch. It indicates the correct melting temperature and lets the film retract faster. The embossing also enables optimal vapour diffusion; in spot bonded and loose laid installation, in the points where it remains intact, preventing blisters and swelling.
   |   

Questions? Please contact us

Or submit our contact form