Showing 145–160 of 333 results
-
RADEX 3000 Non-Reinforced Radon Membrane
REF:
REF:Description
Protection of Buildings from the Ingress of Radon Gas RADEX 3000 Radon Membrane is manufactured from an enhanced blend of polymer films that is suitable for use in the protection of buildings from the ingress of radon gas. Radex 3000 Radon Membrane also acts as a damp proof membrane, but is not intended for use where there is the risk of hydrostatic pressure. It is approved for use in Ireland. Radex 3000 Radon Membrane can be used in most common floor constructions. It is installed... -
Tyvek FlexWrap™NF
REF:
REF:
Description
Tyvek® FlexWrap™ self adhered flashing does not require mechanical fasteners, even in flexed corner areas around building openings. This allows it to provide easy, one-step insulation for hard-to-seal corners around windows and doors. FlexWrap™ is designed to help protect vulnerable corners against air and water intrusion, as part of a complete DuPont Building Envelope Solution. It’s effective across a range of window and door designs and a wide range of typical wall substrates, including OSB, plywood, gypsum, concrete masonry unit (CMU) and other non-nailable sheathing... -
Bond It Bitubond Aluminium Solar Reflective Paint
REF:
REF:
Description
Reduces heat build-up and gives a reflective finish to bituminous coating A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, aged asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat build-up and gives a reflective finish to bituminous coatings and primed steel. Suitable for the refurbishment of aged steel roofs.What the experts have to say
Solar Reflective PaintApplication TipSTIR VERY THOROUGHLY BEFORE USE. Do not thin. Apply immediately and continue stirring periodically during use. Apply by brush or mohair roller When brushing, use soft bristle brushes applying the lightest of pressure. -
Bond It Build-Mate Building Mastic
REF:
REF:
Description
Uses Bond It BUILDING MASTIC can be used to seal and bed window and door frames manufactured from metal or wood. It can also be used for the maintenance of low rise building joints, seals and flashing and for pointing around precast building materials. Preparation All surfaces must be clean, dry, sound and free from dust, oil, loose particles or any other contaminants that may hinder adhesion. Polythene tape or foam backing should be used in movement joints. Application Apply using a standard sealant gun.... -
Bond It Contractors Grade PVA
REF:
REF:
Description
An all purpose, premium quality primer, sealer and bonding agent that dries quickly to give high bond strength. Contractors Grade PVA can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. Preparation All surfaces must be clean, dry and free from dust, grease or contaminants that may hinder adhesion. Remove all loose material and ensure underlying... -
Bond It CTA Flexible
REF:
REF:
Description
Bond It CTA FLEXIBLE is a white, cement based, thin and thick bed, standard setting, wall and floor tile adhesive. CTA FLEXIBLE offers properties such as; high grab, non-slip and flexibility making it suitable for use in areas subject to limited movement and vibration, internally and externally. Suitable for use with all types of ceramic floor and wall tiles, mosaics, porcelain, natural stone, marble and travertine tiles onto substrates including; underfloor heating, tile on tile and properly prepared sheeted timber. Water resistant suitable for use... -
Bond It Fire Resistant Expanding PU Foam
REF:
REF:
Description
A high performance, polyurethane expanding foam, fire rated and tested to BSEN 1366-4 and BS476 Part 20 (the most stringent test for fire rated products). Seals irregular gaps and expands over 40 times its can volume. This foam can be used at temperatures from +5°C to +25°C. The cured foam is semi-rigid and predominantly close-celled. It is resistant to temperatures ranging from -40°C to +100°C and to ageing, but not to UV-rays. Noise and heat insulation values are excellent. Available in gun grade or straw... -
Bond It Natural Tile Sealer & Polish
REF:
REF:
Description
A high sheen, gloss sealer and polish for natural stone, unglazed walls and floor tiles. -
Bond It Save Nails
REF:
REF:
Description
An instant grab, non-slumping, multi-purpose building adhesive with gap-filling properties that will bridge gaps up to 12 mm. APPLICATION Suitable for interior and exterior use on most common building materials including brick, ceramics, glass, metals, plaster, plastics, wood and stone. Replaces mechanical fixings in a variety of DIY applications. -
Comfort Artificial Landscape Grass 36 mm
REF:
REF:
Description
Looking for a realistic lawn without the hassle of maintaining it? Then look no further than Laydex Comfort Artificial Landscape Grass. The two tone straight green yarn is designed to mimic the colours, shape, texture and behaviour of natural grass. Providing a lush green garden year round with no mowing necessary, Comfort Artificial Landscape Grass is the number one choice. -
Damstik Dispersion Adhesive
REF:
REF:
Description
Easy to apply & Short waiting time Solvent-free dispersion adhesive suitable for bonding of textile coverings with e.g. synthetic backing, needle felt, natural fibre coverings with backing as well as linoleum, PVC and CV floor coverings on suitable absorbent substrates in interior areas. -
DuPont™ Tyvek® Acrylic Tape
REF:
REF:
Description
DuPont™ Tyvek® Acrylic Tape is a single-sided acrylic tape that is particularly suitable for damage repairs or making good as well as seals around pipes, windows or overlaps. Tyvek® Acrylic Tape is made of durable Tyvek® HDPE and acrylic adhesive for strong, durable bonds. It is recommended for use with most Tyvek® breather membranes and AirGuard® air and vapour control layers (AVCLs). -
Fortessa Amalfi
REF:
REF:
Description
Amalfi is a distinctive and stylish door lever on rose that underwent specialist lacquer treatments to provide a high resistance to shocks and abrasions and to help maintain its natural shine long into the future. All Fortessa products undergo thorough testing at all stages of manufacture, and performance of all working parts is rigorously tested. Round rose Available also in Box Sets Meets DIN EN 1906 Interior Residential classification standards Manufacturer’s Warranty: 10 yearsWhat the experts have to say
Fortessa AmalfiDoor Lever on RoseFortessa Door Handles are covered by a 10 Year Guarantee on mechanical parts. Our levers have been tested to pass DIN EN 1906 European Quality Standards, and have been tested for frequency of use. Essentially each door handle is guaranteed for 100,000 revolutions. -
LAYDEX RADON POLYSUMP
REF:
REF:
Description
Lightweight, Durable and Easily Installed Radon Sump The Laydex Radon Sump is a high quality roto-modulated PVC unit which is lightweight, durable and easily installed. The outlet positions are easily cut on-site to allow vent pipes to be attached for extraction, and dispersion, of radon in the atmosphere. Laydex also supply quality Radon Barrier Membranes for use in affected areas.What the experts have to say
IRISH AGRÉMENT BOARDCERTIFICATE No. 16/0386This Certificate relates to the Laydex Polysump Radon Sump, which is used as part of a radon protection measure in buildings and enables subfloor depressurisation or pressurisation to be introduced if required at a later date. This Certificate certifies compliance with the requirements of the Building Regulations 1997 to 2014. -
Pluvitec Specialtec P 3 mm
REF:
REF:
Description
Modified APP Waterproofing Membrane Pluvitec Specialtec is an APP modified bituminous waterproofing membrane with both composite polyester and fibreglass reinforcements providing both good mechanical characteristics and excellent dimensional stability. Specialtec P 3mm is the underlay in our fully Pluvitec warranty backed build up. -
VISQUEEN Gas Resistant Self Adhesive Membrane
REF:
REF:
Description
High Resistance to Gas Visqueen Gas Resistant (GR) Self Adhesive Membrane is designed to prevent the transmission of carbon dioxide, radon and methane gases in tanking applications or where hydrostatic pressure is present. Resistance to gas is achieved by an integral aluminium film. Substrates should be primed with Visqueen HP Tanking Primer prior to application. Visqueen Gas Resistant (GR) Self Adhesive Membrane is compatible with Visqueen Gas Resistant (GR) DPC and other Visqueen Gas Membranes.
