Show categories
- Air & Weather Tightness
- Building Products
- Adhesives
- Artificial Grass
- Basta Door Handles & Accessories
- Breather Membranes
- Building Products
- Cleaners
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Handrail
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Meter Boxes
- Oxide Paint
- Personal Protective Equipment
- Radon & Gas Protection
- Roofing & Bituminous Products
- Shelving
- Silicones & Sealants
- STEGU Decorative Stone
- Tapes
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tube & Fittings
- Tyvek® Building Envelope Solutions
- Underslating
- Flooring
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Ceramics
- Commercial Carpet
- Commercial Vinyl
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Linoleum
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wallcoverings
- Wetroom Solutions
- MAPEI
- Passive Fire Protection
- Roofing
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Hot Melt
- Hybrid Liquid Waterproofing Membranes
- Insulation
- MPM Liquid Waterproofing
- Roof Coatings
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- Standing Seam Systems
- Uncategorized
Showing all 4 results
-
Nullifire SC803 Intumescent Steel Coating
REF:REF:Description
SC803 Intumescent Steel Coating – On-Site, Water Based SC803 Intumescent Steel Coating is an ultra low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork, optimised to 60 minutes fire resistance. SC803 contains no substances of very high concern. Usage/purpose SC803 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 90 minute protection is also available. SC803... -
Nullifire SC804 Intumescent Steel Coating
REF:REF:Description
SC804 Intumescent Steel Coating – On-Site, Water Based SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern. Usage/purpose SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120-minute protection is also available. SC804 can be used on steel, cast iron... -
Nullifire SC801 Water-Based Intumescent Basecoat
REF:REF:Description
SC801-120 Intumescent Basecoat is a waterborne, white, thin film intumescent coating for the protection of internal structural steelwork. SC801-120 can provide up to 120 minutes fire resistance.What the experts have to say
Nullifire SC801ApplicationAirless spray equipment is recommended for application. SC801 may be applied up to a maximum wet film thickness of 1.2 mm in a single spray coat comprising of several quick passes. Brush/Roller application is also achievable. See datasheet in the downloads section for more details. -
Nullifire SC802 Water-Based Intumescent Basecoat
REF:REF:Description
SC802 Intumescent Basecoat is a water-based, white, thin film intumescent coating for the protection of internal structural steelwork. SC802 can provide up to 60 minutes fire resistance. It can be applied to a smooth matt finish. A compatible top-seal can be applied if a decorative finish is required.What the experts have to say
Nullfire SC802ApplicationAirless spray equipment is recommended for application. SC802 may be applied up to a maximum wet film thickness of 1.0 mm in a single spray coat comprising of several quick passes. Brush/Roller application is also achievable. See datasheet in the downloads section for more details.