- Air & Weather Tightness
- Airtight & Weatherproof Membranes
- Airtightness Solutions
- EPDM Façade Solutions
- External Weather Seals
- Building Products
- Artificial Grass
- Breather Membranes
- Building Products
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drainage Channels
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Oxide Paint
- Radon & Gas Protection
- Roofing & Bituminous Products
- Silicones & Sealants
- STEGU Decorative Stone
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tyvek® Building Envelope Solutions
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Commercial Carpet
- Commercial Vinyl
- Floor Coating Products
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wetroom Solutions
- Passive Fire Protection
- Resin Surfaces
- Anti-Static Resins
- Cementitious Products
- Decorative & Commercial Resin Flooring
- Decorative Quartz Resin Finishes
- Epoxy Resin Floor Coating
- Epoxy Resin Floor Screeds & Self Smoothing Finishes
- Grip/Slip Resistant Systems
- Polyurethane Floor Coatings
- Polyurethane Resin Screeds
- Resin Bound / Resin Bonded Systems
- Single Pack Floor Coatings
- Wall Coatings
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- Green Roof Systems
- High Performance Vapour Barriers
- Liquasil Roof Coatings
- Roof Slates
- Roofing Accessories
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- SIP Roof Panels
- Standing Seam Systems
Showing 1–16 of 34 results
Bond It Brick Patio CleanerREF:REF:
DescriptionA powerful acid based cleaner that will remove cement and mortar splashes, grime, oil, grease and other difficult-to-remove stains, from brickwork, patios, garages, paving, concrete floors and warehouses. Application Gloves, overalls, boots and goggles should be worn at all times during application. Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar. Before commencing a full clean down, test on...
Bond It Contractors Grade PVAREF:REF:
DescriptionAn all purpose, premium quality primer, sealer and bonding agent that dries quickly to give high bond strength. Contractors Grade PVA can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. Preparation All surfaces must be clean, dry and free from dust, grease or contaminants that may hinder adhesion. Remove all loose material and ensure underlying...
Bond It Dust Proofer & HardenerREF:REF:
DescriptionA premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Suitable for use on garage, warehouse, factory or workshop floors. Application Gloves, boots and goggles should be worn at all times during application. Ensure all surfaces are clean, dry and free from oil, grease, paint or polish to maximise the effectiveness of this product. If in doubt use Bond It BRICK & PATIO CLEANER to remove any stubborn stains before washing down and applying Bond It...
Bond It Frost Proofer & Rapid HardenerREF:REF:
DescriptionA high performance building chemical that increases frost resistance and accelerates setting time of cement by improving the rate of hydration. Specially developed for brick laying and rendering, etc. at low and sub-zero temperatures. Added to the mix, this product will improve workability and increase strength gain and resistance to water penetration. It allows up to a 15% reduction of gauging water, and can also reduce curing times and shrinkage. Will not degrade steelwork or wall tiles as formulation is chloride-free. Conforms to: EN934-2 (2009)
Bond It PVA Adhesive & SealerREF:REF:
DescriptionA high solids, high performance sealer, primer, dust-proofer and bonding agent. Primes and seals porous surfaces. Improves adhesion and reduces cracking in cements and plaster. APPLICATION Plaster primer, porous surface primer and sealer – Rendering key coat for internal applications – admixture – dust sealer – general purpose adhesive for bonding all common construction materials.
Bond It Stabilizing SolutionREF:REF:
DescriptionA white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating. Suitable for interior and exterior use and can be applied to damp surfaces. Stabilizes poor surfaces, seals and binds chalky or weathered areas, gives a sound base for decorating and is quick drying. Uses For use as a pre-treatment for surfaces which are old, weathered, chalky or porous. Suitable for use on most substrates including concrete, cement, plaster, plasterboard, renders, pebbledash and MDF etc. Application Do not dilute. Stir well...
Bond It Integral Water Resistant PlasticiserREF:REF:
Description3 in 1 formulation: waterproofs, plasticises and retards. A high strength cement water-proofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists water penetration even when under pressure.
Bond It Mould StopREF:REF:
DescriptionA premium grade, powerful cleaning agent formulated to remove mould, mildew, organic growth and lichen, etc. Removes all types of organic growth, algae, etc. from brick concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass. Can also be used on fabric awnings. Can be applied internally and externally.
Bond It SBR AdmixtureREF:REF:
DescriptionA styrene butadiene copolymer latex, which increases flexibility of cement screeds and mortars, while improving water and chemical resistance and durability. Suitable for internal and external floors as well as rendering in areas of continual or intermittent water and chemical contact. Excellent waterproofing admixture that improves adhesion of cementitious screeds and reduces shrinkage and cracking when repairing floor screeds. Also ideal as a bonding agent for new to old concrete.
Bond It Liquid Mortar PlasticiserREF:REF:
DescriptionA chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increase their resistance to freeze-thaw cycles. Reduces the risk of cracking, crazing and the need for lime. Conforms to BS EN 934-3 2001. Also available on special request, the original wood resin blend. Conforms to EN943-3 (2009) + A1 (2012).
Bond It Patio BlasterREF:REF:
DescriptionA concentrated disinfectant for the removal and prevention of green mould, lichens and algae on hard surfaces. A simple 3 step system – dilute, apply, leave to dry! For use on: patios, tarmac and asphalt driveways, fencing, decking, pathways, roofing, painted & glazed pots, garden furniture and ornaments, weatherboard, brickwork, masonry, York stone, concrete, pebbledash, garden sheds, greenhouses, conservatories, gravestones, gravel, PVC, caravans, tennis courts and other artificial play/sports surfaces.
Bond It Silicone Ultra WatersealREF:REF:
DescriptionA premium grade, solvent-free silicone waterseal. Provides a micro-porous water-repellent coating for masonry work which, while repelling exterior water. It allows the emission of water vapour ensuring the interiors and cavity walls remain dry. Used as a masonry water proofer suitable for use on brick, stone, concrete and unglazed tiles. It protects the surface against water and frost, providing a micro-porous coating which does not change the aesthetic appearance of a building. A secondary benefit of the product is to repel waterborne dirt and resist fungal...
Bond It PatiosealREF:REF:
DescriptionA premium grade, solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages as well as dirt and grime build-up. For enhancing the present colour and greatly extending the lifespan of block paving driveways or paths and patios.
Bond It High Strength Brick AcidREF:REF:
DescriptionA super strength (18% hydrochloric acid) cleaner that will remove cement and mortar splashes from brickwork, paving, concrete floors and warehouses.
Bond It Fire CementREF:REF:
DescriptionA buff coloured, cement which has a consistency similar to putty. It is resistant to high temperatures in both air and heat setting. Once cured the mortar will resist temperatures up to 1250°C. Ready to use, blend of high quality clays and selected fillers that sets rock hard when exposed to heat. Does not contain asbestos.
Bond It Powder Mortar PlasticiserREF:REF:
DescriptionA resin based mortar plasticiser, supplied in a powder form, which can be effectively used for brick laying and rendering. An air entraining plasticiser that replaces lime in the mix, increasing both plasticity and workability to prevent shrinkage, cracking and crazing during the setting process. Will also provide a degree of freeze-thaw cycles. Conforms to EN934-3 (2009). APPLICATION Add contents of sachet directly to the mixer at any stage or mix with the gauging water.