Show categories
Need Advice? Call Us Now 01 6426600 or
Request A Call Back
or
Email Us

Showing 17–32 of 34 results

  • Bond It Plasterers Pregrit

    REF:
    Pregrit is a ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces.
    REF:

    Description

    Pregrit is a ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces.
  • Bond It Plug It

    REF:
    REF:

    Description

    A cement based rapid setting compound for plugging running water leaks and over coating joints, prior to the application of Bond It Tanking Slurry. Cures in less than 2 minutes.
  • Bond It Clear Coat Block Sealer

    REF:
    REF:

    Description

    A ready to use, clear sealant for block paving, paths and drive ways. Protects from water penetration, staining and dirt/grime build-up. Preparation Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior to application.) Ensure the surface to be treated is free from oil, grease, dust and any other loose material that may hinder adhesion. It is recommended that a...
  • Bond It Tarmac Restorer

    REF:
    REF:

    Description

    A ready-to-use, black, water-based coating for tarmac drives and pathways, designed to restore colour, reduce water penetration, and protect from dirt/grime build-up. Uses Designed to restore colour, reduce water penetration, and protect from dirt/grime build-up. Application DRIVE ALIVE TARMAC RESTORER is ready to use, and does not require diluting. Stir thoroughly before using and ensure the surface is completely dry prior to application. Apply using a brush, roller or squeegee, ensuring that no pooling or ponding occurs. Two coats are recommended, allow a minimum of...
  • Bond It Colour Enhancer

    REF:
    REF:

    Description

    Designed to enhance coloured concrete and block paving as well as protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles. Preparation Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior...
  • Bond It Instant Pot Hole Repairer

    REF:
    REF:

    Description

    A cold lay asphalt concrete pot hole repair compound.
  • Bond It Power Proof

    REF:
    A premium quality, concentrated waterproofing solution and render admixture
    REF:

    Description

    A premium quality, concentrated waterproofing solution and render admixture. The addition of Power-Proof improves the workability and plasticity of concrete. It is formulated to be non-corrosive, containing no chloride additives. Conforms to EN934-3 (2009) + A1 (2012).
  • Bond It Power Mix

    REF:
    REF:

    Description

    A premium quality, concentrated mortar plasticiser designed to improve the workability of brick laying and plastering mortars, as well as increasing their resistance to freeze-thaw cycles. The use of Power-Mix also removes the need for lime and reduces the risk of cracking and crazing. Conforms to EN934-3 (2009) + A1 (2012).
  • Bond It Power Tone Liquid Cement Dye

    REF:
    A premium quality, concentrated cement dye designed to ensure a uniformed colour is attained when colouring cement and mortar
    REF:

    Description

    A premium quality, concentrated cement dye designed to ensure a uniformed colour is attained when colouring cement and mortar. Conforms to BS1014. Bond It POWER TONE also contains plasticisng and waterproofing agents which eliminates the need for additional admixtures. Use of POWER TONE also reduces efflorescence.
  • Bond It Power-Frost

    REF:
    REF:

    Description

    A fast acting, concentrated building chemical that increase frost resistance and accelerates setting times of concrete. Fast-acting, chloride-free formula with controlled dosage to ensure consistency of mix. Less waste, easy to use and easily portable. This product will not degrade steel wall ties, reinforcements and other steel items. Conforms to EN934-2 (2009).
  • Bond It Cem-Quik Rapid Set Mortar

    REF:
    A cement based product which is simple to apply and sets hard in approximately 30 minutes
    REF:

    Description

    A cement based product which is simple to apply and sets hard in approximately 30 minutes. For us as a patch repair or where installations require a fast repair job. For internal and external repairs to most masonry substrates; for gap and crack filling, jointing and sealing earthenware pipes and drains, patching steps and windowsills, setting and bedding WC’s, sinks, railings and posts. Fills holes and cracks in concrete, brick, blocks and stone. Sets in the cold and wet. Conforms to EN1504-3.
  • Bond It Tanking Slurry

    REF:
    A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls, and tanks
    REF:

    Description

    A cementitious waterproof coating designed for use below and above ground for cellars, retaining walls, and tanks. A blend of Portland cements, quality graded aggregates and chemical modifiers, which provide a waterproof coating system. Uses • Tanks, pits and swimming pools • Above and below ground walls and floors • Cellars, underground rooms • Interior spaces, e.g. ducting, party walls, lift shafts • Fish ponds
  • Bond It Waterseal Masonry Waterproofer

    REF:
    REF:

    Description

    A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost. Used as a masonry water-proofer suitable for use on brick, stone and concrete. It protects against water and frost, providing a breathable coating which does not change the physical appearance of a building. A secondary benefit of the product is to repel water-borne dirt and resist fungal growth as well as help reducing heating costs, as energy is not...
  • Bond It Mould Release Oil

    REF:
    Bond It Mould Release Oil
    REF:

    Description

    A chemical release agent for mould and shutter surfaces prior to casting concrete, giving a clean release. After removal of formwork the concrete will have a smooth, uniform, hard finish with reduced incidence of blow holes.
  • Bond It Powdered Cement Dye

    REF:
    A range of easy-to-use, chloride-free permanent cement colourants
    REF:

    Description

    A range of easy-to-use, chloride-free permanent cement colourants. Manufactured with the best quality oxide pigments for permanently colouring all types of mortars cement, concrete and renderings. Easy dispersion of pigment into the mix allows for uniform shades per batch, colour can be adjusted to give a wider variety of shade depths. Conforms to EN12878.
  • Bond It Oil Stain Remover

    REF:
    An oil ingesting solution for removing unsightly oil and grease stains from tarmac and concrete.
    REF:

    Description

    An oil ingesting solution for removing unsightly oil and grease stains from tarmac and concrete. Simply pour, allow to dry and brush away. VOC-free formulation. Bio-degradable.

Questions? Please contact us

Or submit our contact form