Bond It Colour Enhancer

Bond It Colour Enhancer


Designed to enhance coloured concrete and block paving as well as protect from water penetration, oil or grease spillages and dirt/grime build-up. Will enhance present colour and extend the lifespan of the treated surface. A ready-to-use, coloured solution for use on concrete, block paving, paving slabs, walling and roof tiles.

Remove any moss or lichen that may be present. For best results use DRIVE ALIVE ORGANIC CLEANER prior to application (ensure the residue is thoroughly washed off and left to dry for 48 hours prior to application.) Ensure the surface to be treated is free from oil (DRIVE ALIVE OIL STAIN REMOVER should be used to remove any oil stains), grease, dust and any other loose material that may hinder adhesion. It is recommended that a test be carried out on a small inconspicuous area to ensure the required effect is achieved. Mask off all areas not to be coloured as product cannot be removed once applied. Wear gloves and overalls to protect clothes and skin from splashes. Place the container on polythene or cardboard prior to opening to contain any drips.

Make an enquiry

    • Solvent-free formulation – low odour

    • Facilitates easier cleaning

    • Improves water resistance and UV resistance

    • Contains fungicide which retards mould growth

    Physical Properties:
    Coloured liquid, non-flammable, zero VOC, water miscible
    STIR WELL BEFORE USE AND PERIODICALLY DURING USE. Do not apply to wet surfaces, in high humidity or when rain is expected
    Application Temperature Range:
    5℃ to 30℃
    Drying Time:
    1-2 hours in warm, sunny conditions
    Coverage Rate:
    40 - 60m2 per 4 litre container
    Rinse then wash brushes and rollers in warm, soapy water
    Shelf Life:
    2 years
    Red, Brindle, Buff, Charcoal
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products