Showing all 13 results
-
Stegu Classic Pointing Mortar
REF:
REF:Description
A masonry mortar with improved adhesion for making joints It is perfect for pointing porous cement and gypsum STEGU cladding. It is also used as pointing mortar: clinker in masonry walls, facade clinker tiles, concrete tiles imitating brick, stone or sandstone as well as gypsum tiles fixed to any stable surface, and such difficult surfaces as chipboard, plastics or rustless metals. It can be applied internally and externally, and is available in White, Beige, Grey and Graphite colours. Read More Installation Tips & Tricks –... -
Stegu Multielastic Adhesive Mortar
REF:
REF:Description
An Easy-to-Use Read-Made Dry Mix Forming Adhesive Mass When Mixed with Water The MULTIELASTIC Adhesive Mortar is a ready-made dry mix of mineral and organic binders, mineral fillers and modifying additives that forms uniform adhesive mass when mixed with water. The mix quickly provides a strong bond and initial strength. After setting, the bond is water- and frost-resistant. MULTIELASTIC Adhesive Mortar is intended for bonding Stegu concrete tiles, wall and floor ceramic tiles in both indoor and outdoor settings. The product can be applied to... -
Bond It Contractors Grade PVA
REF:
REF:
Description
An all purpose, premium quality primer, sealer and bonding agent that dries quickly to give high bond strength. Contractors Grade PVA can be used with plaster, cement, timber, gypsum wall boards and paper. Properties as an adhesive include fast drying. It is also a readily dilutable primer for sealing applications or addition to cement and plaster to improve adhesion and cure. Preparation All surfaces must be clean, dry and free from dust, grease or contaminants that may hinder adhesion. Remove all loose material and ensure underlying... -
Bond It PVA Adhesive & Sealer
REF:
REF:
Description
A high solids, high performance sealer, primer, dust-proofer and bonding agent. Primes and seals porous surfaces. Improves adhesion and reduces cracking in cements and plaster. APPLICATION Plaster primer, porous surface primer and sealer – Rendering key coat for internal applications – admixture – dust sealer – general purpose adhesive for bonding all common construction materials. -
Bond It Stabilizing Solution
REF:
REF:
Description
A white, ready-to-use, water-based treatment for bonding and priming surfaces prior to painting and decorating. Suitable for interior and exterior use and can be applied to damp surfaces. Stabilizes poor surfaces, seals and binds chalky or weathered areas, gives a sound base for decorating and is quick drying. Uses For use as a pre-treatment for surfaces which are old, weathered, chalky or porous. Suitable for use on most substrates including concrete, cement, plaster, plasterboard, renders, pebbledash and MDF etc. Application Do not dilute. Stir well... -
Bond It Integral Water Resistant Plasticiser
REF:
REF:
Description
3 in 1 formulation: waterproofs, plasticises and retards. A high strength cement water-proofer for internal and external rendering, roof screeds, swimming pools, tanks, retaining walls, basement walls and reservoirs. Improves workability and plasticity of concrete and mortar in the wet state and resists water penetration even when under pressure. -
Bond It Liquid Mortar Plasticiser
REF:
REF:
Description
A chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increase their resistance to freeze-thaw cycles. Reduces the risk of cracking, crazing and the need for lime. Conforms to BS EN 934-3 2001. Also available on special request, the original wood resin blend. Conforms to EN943-3 (2009) + A1 (2012). -
Bond It Plasterers Pregrit
REF:
REF:
Description
Pregrit is a ready-to-use internal plaster bonding agent with added aggregate to provide a key prior to plastering on smooth surfaces. -
Bond It Power Mix
REF:
REF:
Description
A premium quality, concentrated mortar plasticiser designed to improve the workability of brick laying and plastering mortars, as well as increasing their resistance to freeze-thaw cycles. The use of Power-Mix also removes the need for lime and reduces the risk of cracking and crazing. Conforms to EN934-3 (2009) + A1 (2012). -
Bond It Power Tone Liquid Cement Dye
REF:
REF:
Description
A premium quality, concentrated cement dye designed to ensure a uniformed colour is attained when colouring cement and mortar. Conforms to BS1014. Bond It POWER TONE also contains plasticisng and waterproofing agents which eliminates the need for additional admixtures. Use of POWER TONE also reduces efflorescence. -
Bond It Power-Frost
REF:
REF:
Description
A fast acting, concentrated building chemical that increase frost resistance and accelerates setting times of concrete. Fast-acting, chloride-free formula with controlled dosage to ensure consistency of mix. Less waste, easy to use and easily portable. This product will not degrade steel wall ties, reinforcements and other steel items. Conforms to EN934-2 (2009). -
Bond It Cem-Quik Rapid Set Mortar
REF:
REF:
Description
A cement based product which is simple to apply and sets hard in approximately 30 minutes. For us as a patch repair or where installations require a fast repair job. For internal and external repairs to most masonry substrates; for gap and crack filling, jointing and sealing earthenware pipes and drains, patching steps and windowsills, setting and bedding WC’s, sinks, railings and posts. Fills holes and cracks in concrete, brick, blocks and stone. Sets in the cold and wet. Conforms to EN1504-3. -
Bond It Powdered Cement Dye
REF:
REF:
Description
A range of easy-to-use, chloride-free permanent cement colourants. Manufactured with the best quality oxide pigments for permanently colouring all types of mortars cement, concrete and renderings. Easy dispersion of pigment into the mix allows for uniform shades per batch, colour can be adjusted to give a wider variety of shade depths. Conforms to EN12878.
