Showing 465–480 of 611 results
-
RESITRIX® Scissors
REF:
REF:
Description
Particularly due to their sharpness, RESITRIX® scissors provide optimal flexibility and allows for clean and accurate installation of RESITRIX® waterproofing membranes.What the experts have to say
RESITRIX®System AccessoriesEvery flat roof is different, has its edges, penetrations or special requirements for installation or individual aesthetic requirements – these are the reason for RESITRIX® extensive range of accessories where all components optimally match to one another and form a perfect functional unit. -
Tremco SF512 Water Resistant Adhesive
REF:
REF:
Description
SF512 is a single component product derived from advanced MS polymer technology, for use with PVC & rubber flooring. SF512 has been specially developed for bonding PVC and rubber floor coverings to a wide range of substrates, including; Concrete substrates, Cementitious substrates, Metal substrates and Plywood substrates. -
Bond It Duo “2 In 1″ Wood Glue
REF:
REF:
Description
Fast drying, water-resistant, PVA adhesive with a bond strength stronger than the wood itself. Conforms to the requirements of category D3/3 and D3/4 of EN204. Meets the resistance to sustained load (creep test) requirements of BS 4071 “Polyvinyl Acetate (PVA) Emulsion Adhesives for Wood”.What the experts have to say
Wood GlueApplicationRapid bond strength development. Suitable for hard and soft woods, decorative laminates, chipboard, blockwood and other engineered timber panels. Can be used in applications where joints may be subjected to short term water contact or exposure to high humidity i.e. kitchen work surfaces, window frames, doors and stairs. Suitable for interior and exterior applications. -
Bond It Fix ‘N’ Grout
REF:
REF:
Description
A brilliant white, ready mixed adhesive paste, for use as a thin-bed waterproof ceramic wall tile adhesive and joint filling grout. Suitable for fixing all types of ceramic wall tiles, including mosaics, porcelain and vitrified tiles in internal locations. Conforms to: EN12004 Type D2. -
Bond It Glass-Mate Mirror Adhesive
REF:
REF:
Description
A low modulus neutral cure (LMN) silicone for interior mirror fixing. Has excellent unprimed adhesion on most mirror coatings and has outstanding resistance to heat and humidity. Not affected by sunlight, ultra violet radiation and temperature extremes. This product will accommodate thermal expansion and is non-corrosive and odourless. -
Bond It Liquid Mortar Plasticiser
REF:
REF:
Description
A chemically balanced plasticiser, based on synthetic air entraining agents, designed to improve workability of brick laying and plastering mortars and increase their resistance to freeze-thaw cycles. Reduces the risk of cracking, crazing and the need for lime. Conforms to BS EN 934-3 2001. Also available on special request, the original wood resin blend. Conforms to EN943-3 (2009) + A1 (2012). -
Bond It Patination Oil
REF:
REF:
Description
A protective coating for new and restored leadwork. Specially designed to minimize unsightly staining on newly applied lead and other materials. Provides even colour and protects surfaces.What the experts have to say
Patination OilPreparation TipThe lead to be treated should be clean, dry and free from cement, dust and loose debris that may affect adhesion. -
Bond It PVCU Cream Cleaner
REF:
REF:
Description
An effective solvent-free cleaner for uPVC frames, cladding and trims. Also suitable for use around the house, ideal for cleaning taps, trims, plastic or enamel baths and tiles. Removes dirt and stains and can be buffed to give a deep sheen finish. Non-corrosive. -
Fortessa Foko
REF:
REF:
Description
Foko is a distinctive and stylish door lever on rose that underwent specialist lacquer treatments to provide a high resistance to shocks and abrasions and to help maintain its natural shine long into the future. All Fortessa products undergo thorough testing at all stages of manufacture, and performance of all working parts is rigorously tested. Round rose Meets DIN EN 1906 Interior Residential classification standards Manufacturer’s Warranty: 10 yearsWhat the experts have to say
Fortessa FokoDoor Lever on RoseFortessa Door Handles are covered by a 10 Year Guarantee on mechanical parts. Our levers have been tested to pass DIN EN 1906 European Quality Standards, and have been tested for frequency of use. Essentially each door handle is guaranteed for 100,000 revolutions. -
Renolit Alkor Seam Sealer
REF:
REF:
Description
Reinforcement of welded joints, T borders and corners for RENOLIT ALKORPLAN waterproofing membranes.What the experts have to say
PVC Seam SealerApplication TipShake well before use. Dilute only with THF. Consumption: approximately 10g/lm. See RENOLIT ALKORPLAN installation instructions. -
Tremco SF520 Flexible Wood Adhesive
REF:
REF:
Description
A high strength, flexible, single component advanced polymer adhesive for surface bonding most wood flooring. For bonding most types of wood flooring including wood blocks, wood mosaic panels, engineered, laminated and solid wood plank/strip flooring. Use over most common substrates, sand/cement screeds, concrete, calcium-sulphate screeds, stone, metal, timber and epoxy membranes. Not suitable for wood flooring with bitumen based backings. Compatible with most underfloor heating systems. -
Bond It Foil Safe Solvent Cleaner
REF:
REF:
Description
A non-dissolving cleaner for use on unplasticised uPVC profiles and profiles covered by foils. A non-flammable, user friendly formulation that is ideal for the safe and effective removal of uncured PU foam, uncured silicone, label/foil protection adhesive deposits, wax, pen, wet bitumen products, sealing compounds, and general dust, dirt, grime and debris. NOTE: If Foil Safe is being used to prepare areas prior to the application of sealant or adhesive, ensure that all residue is removed as this could hinder adhesion. -
Bond It FS4 Fireshield AC Intumescent Sealant
REF:
REF:
Description
Intumescent acoustic acrylic sealant and adhesive with a decibel rating of 55dBA. When subjected to heat the sealant swells (intumesces) to provide an inert barrier to smoke and flames. It has non-slumping and rapid skinning properties. Conforms to BSEN 140 pt 3; BSEN 20140 sealed. &BS476 pt 20. -
Bond It Mega Stick
REF:
REF:
Description
A fast curing, adhesive foam that has been specially developed for the rapid installation of plasterboard, insulation boards, floorboards and roof decking. Supplied in an aerosol can, the product can be used with a standard foam gun. The cured adhesive is an excellent heat insulator and has exceptionally good adhesion properties. Can also be used to dampen sound.What the experts have to say
Mega StickApplicationAdheres well to most building materials, with the exception of Teflon, polyethylene and silicone surfaces. Suitable for installing doors and windows, insulating and fixing pipes, filling holes and gaps, fixing wall panels, skirting boards, roof tiles, decking and for thermal insulation.
-
Bond It Patio Blaster
REF:
REF:
Description
A concentrated disinfectant for the removal and prevention of green mould, lichens and algae on hard surfaces. A simple 3 step system – dilute, apply, leave to dry! For use on: patios, tarmac and asphalt driveways, fencing, decking, pathways, roofing, painted & glazed pots, garden furniture and ornaments, weatherboard, brickwork, masonry, York stone, concrete, pebbledash, garden sheds, greenhouses, conservatories, gravestones, gravel, PVC, caravans, tennis courts and other artificial play/sports surfaces. -
Bond It SealAcryl
REF:
REF:
Description
A one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.What the experts have to say
SEALACRYLApplication TipDo not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
