Show categories

Showing 17–29 of 29 results

  • Bond It A43 Threadlock

    REF:
    REF:

    Description

     A medium viscosity, medium strength screw and thread-locker. Used as a locking compound for direct application to lightly oiled components. Replaces spring washers and lock nuts. Removable using the correct tools. Also prevents rusting or corrosion. Non-drip consistency for clean, economic application. Use Bond It A43 THREADLOCK can be used as a locking compound for direct application to lightly oiled components, thus reducing the need for pre-treatment. Also suitable as a standard anaerobic threadlocker for fine to medium pitch threads. Preparation Remove heavy oil and...
  • Bond It A70 Studlock

    REF:
    REF:

    Description

    A high strength, anaerobic adhesive for the permanent retention and sealing of threaded fasteners, sleeves and bearings. It is resistant to fuels, oils, hydraulic & refrigeration fluids. Also acts as a lubricant during assembly to ensure accurate torqueing and protection against corrosion. Prevents rusting or corrosion and cannot be dismantled once adhesive has set. Uses Bond It A70 STUDLOCK can be used for fixing and sealing of plugs, through bolts and studs into castings, etc. It eliminates split pins, double nutting and spot welds and...
  • Bond It HVC Cyanoacrylate Glue

    REF:
    A high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu
    REF:

    Description

    A high viscosity cyanoacrylate adhesive developed for bonding rubber and plastics including PVCu. For use on porous surfaces. Also has gap-filling properties making it ideal for bonding trims and caps on PVCu windows as well as rubber, wood, metal, ceramics, MDF, leather, porcelain and card. Set time range 10 to 30 seconds.
  • Bond It RGC Cyanoacrylate Glue

    REF:
    A medium viscosity superglue that fills gaps to 0.1mm
    REF:

    Description

    A medium viscosity superglue that fills gaps to 0.1 mm. Fast setting at room temperature and is economical to use, ideal for perfect fit surfaces where rapid setting is required. Suitable for close fir non-porous substrates e.g. most plastics, metals, glass, PVCu, rubber and EPDM. Set time 5 to 15 seconds.
  • Bond It Floorbond CTT

    REF:
    REF:

    Description

    A solvent-free acrylic emulsion providing a permanently tacky film for the removable fixing of “loose lay” carpet tiles. Enables tiles to be easily lifted and replaced when required. Non-staining, resistant to plasticiser migration and may be applied by either roller or brush. Recommended for installing carpet tiles with the following backing: PVC, PVC/Glass fibre, Bitumen/Felt or non-woven fabric, APP and other polymer backings including polyurethane, and Hessian.
  • Bond It Floorbond MPA

    REF:
    REF:

    Description

    A light coloured, solvent-free, acrylic emulsion adhesive. The adhesive has a long open time with early tack development, is non staining and has excellent resistance to plasticiser migration. Bond It MPA is recommended for installing vinyl sheet and tile coverings, cushion floor, PVC and PU foam backed carpets, the majority of other carpets and needle punch / fibre bonded carpets.  
  • Bond It Floorbond PSA

    REF:
    REF:

    Description

    A premium grade “pressure sensitive”, solvent free, acrylic adhesive for use with resilient floor coverings. It is non staining, has excellent resistance to plasticiser migration and may be applied by either trowel or roller. Bond It PSA is recommended for installing PVC, vinyl  sheet and tiles and other vinyl backed floor coverings, cushion floor, PVC backed carpet, Polyurethane foam gel carpet, including impervious backing. This product is also suitable for use with Karndeen strip flooring.  
  • Bond It LX16 Wood Adhesive

    REF:
    REF:

    Description

    A solvent-based, heavy duty, interior adhesive for bonding all types of wood flooring. Ideal for use where the nature of the wood flooring makes it particularly prone to warping when bonded with waterborne adhesive. Easy to spread with a high shear strength and short open time. Application Suitable for use on parquet flooring, woodblock and wood strip to most common substrates. Can be used with underfloor heating systems. Apply by triangular notched trowel, size as recommended by the wood flooring manufacturer. No waiting time necessary...
  • Bond It Floorbond TS550 Wood Floor Adhesive

    REF:
    REF:

    Description

    A permanently flexible, one part, ready to use, moisture cure, internal wood flooring adhesive. Free from silicone, solvent, isocyanates and water. Based on Hybrid Polymer Technology; the TS range reduces the risk of warping or deforming the wood flooring due to its moisture and solvent-free composition.

    What the experts have to say

    Wood Floor Adhesive
    Application

    For internal bonding of parquet, mosiac oak, wood block, laminated, exotic timber and many other wood floor types to porous or non-porous substrates including; screeds, chipboard, plywood, concrete and anhydrite. Also compatible with substrates incorporating underfloor heating systems.

  • Bond It Contact Adhesive

    REF:
    REF:

    Description

    A premium grade, solvent-based, neoprene adhesive with high grab and long open time to enable re-positioning. 250ml, 500ml and 1L versions are toluene-free.

    What the experts have to say

    Contact Adhesive
    Application
    Can be used for bonding cork, leather, rubber, metals, wood, chipboard, hardboard, laminated plastics (e.g. Formica), dense textiles, plaster, stone, concrete and smoothing compounds. It will bond rigid PVC and PVCu sheets but the materials should be checked for suitability prior to application as plasticiser migration can occur in some instances.
  • Schonox MS-Elastic

    REF:
    REF:

    Description

    Universal elastic parquet adhesive. MS-Elastic is used for bonding all types of parquet on suitable substrates in interior areas as well as in rooms with expected fluctuations in room climate. SCHÖNOX MS-Elastic is suitable for bonding: Block parquet; Oily types of wood; Strip parquet; Mosaic parquet; Parquet blocks RE/WE woodblock Edgewise laminated flooring Suitable solid, double or triple layer ready-made parquet Solid floorboards 10 mm solid parquet (see “instructions”) in floor areas on all absorbent and non-absorbent substrates, interior
  • Schonox Emiclassic Pressure Sensitive Adhesive

    REF:
    Universal pressure sensitive dispersion adhesive
    REF:

    Description

    Universal pressure sensitive dispersion adhesive. For all flexible coverings, for textile coverings with PVC, PU backing, filler-free backing, linoleum coverings, synthetic rubber coverings and impact sound insulation underlay on absorbent and non-absorbent substrates in interior areas.
  • Schonox PU900 2-Part PU Adhesive

    REF:
    REF:

    Description

    2-Component Universal Polyurethane Adhesive. Suitable for bonding vinyl and rubber floor coverings as well as other materials on porous and non-porous substrates in interior areas.

Questions? Please contact us

Or submit our contact form