Showing 161–176 of 192 results
-
Ultra Tile Proflex SP+ES Standard Set Flexible Adhesive
REF:
REF:
Description
UltraTile ProFlex SP+ES is a single part, standard set, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability for large format and intricate porcelain, ceramic and natural stone tiling, with exceptional adhesion and flexural capacity that is ideal for situations where vibration may occur. The adhesive’s unique qualities make it ideal for fixing tiles to most common building substrates including sand/cement render, screeds, brick and block work, heated subfloors, existing tiled surfaces and over boarded wooden floors (for substrates with... -
Tremco SF115 Contact Adhesive – Rubber & PVC
REF:
REF:
Description
SF115 is a one part, modified elastomer contact adhesive for use with rubber and PVC. SF115 has been specially developed for contact bonding (two way stick) of a wide range of floor coverings including: rubber tiles and sheet, vinyl and cork. -
Ultra Tile Ultra Level It Super 30
REF:
REF:
Description
Ultra Floor Level IT SUPER 30 is a high specification, high strength, rapid drying and curing two part cementitious smoothing underlayment. It consists of a powdered component incorporating a blend of high specifications cements, with graded fillers and additives and a pre-gauged polymer liquid.What the experts have to say
Internal FloorsLevel It Super 30Specifically designed for fast turnaround projects. Use as an underlayment for most floor coverings include sheet vinyl, LVT, linoleum & rubber and breathable textiles. Level IT SUPER30 can be applied between thicknesses of 2-15mm. Its initial set is approximately 15 minutes with a walk on time of 30 minutes. -
Tremco SF165 Water Resistant Contact Adhesive
REF:
REF:
Description
SF165 is a cross-linking contact adhesive. SF165 is used for the permanent bonding of: smooth backed rubber floor coverings and PVC nosing covings for service in dry and wet conditions, both indoors and outdoors. -
Tremco SF404 2 Part Epoxy Adhesive
REF:
REF:
Description
SF404 is a two part epoxy based, self-extinguishing adhesive of thixotropic consistency, formulated for ambient temperature curing. SF404 has been specifically developed for the bonding of all resilient (eg. rubber, vinyl and linoleum) and textile floor coverings in areas of high risk and where public safety is the main consideration. -
Tremco SF512 Water Resistant Adhesive
REF:
REF:
Description
SF512 is a single component product derived from advanced MS polymer technology, for use with PVC & rubber flooring. SF512 has been specially developed for bonding PVC and rubber floor coverings to a wide range of substrates, including; Concrete substrates, Cementitious substrates, Metal substrates and Plywood substrates. -
Tremco SF520 Flexible Wood Adhesive
REF:
REF:
Description
A high strength, flexible, single component advanced polymer adhesive for surface bonding most wood flooring. For bonding most types of wood flooring including wood blocks, wood mosaic panels, engineered, laminated and solid wood plank/strip flooring. Use over most common substrates, sand/cement screeds, concrete, calcium-sulphate screeds, stone, metal, timber and epoxy membranes. Not suitable for wood flooring with bitumen based backings. Compatible with most underfloor heating systems. -
Tremco SF600 Multi-purpose Polyurethane Adhesive
REF:
REF:
Description
SF600 is a two part polyurethane adhesive formulated for ambient temperature cure. SF600 is designed for the permanent bonding of a wide range of floor coverings including: Synthetic rubber, PVC and Wood -
Tremco SF200 Carpet Tile Tackifier
REF:
REF:
Description
SF200 is a single component, white waterborne liquid adhesive, which dries to a clear, permanently tacky film. SF200 has a multitude of uses, but has been specifically developed for use on: – release bonding of Hexphalte/ Bitumen backed carpet tiles – some grades of PVC backed carpet tiles and thermoplastic hot melt backed tiles – Underfelts. -
Schonox FPL Plus Self Levelling Compound
REF:
REF:
Description
Suitable for application on subfloor heating systems Schonox FPL Plus is a cement based self-levelling compound for use from 3 to 60 mm. Suitable on cement and gypsum based substrates. Designed for fast levelling in interior and exterior areas.What the experts have to say
Schonox FPL PlusRequirements of substrateSubstrate should have adequate strength, load bearing capacity, dimensional stability and permanent dryness. Ensure area is free of residues which reduce adhesion, e.g. dust, dirt, oil, fat and loose particles. Surface treatments or any "friable" areas of the subfloor must be mechanically removed and the subfloor repaired with SCHÖNOX levelling compounds as required. -
Tremco SX070 Feather Finish Compound
REF:
REF:
Description
SX070 is a rapid drying feather finish compound for interior applications. Ideal for smoothing and repairing the subfloors prior to the installation of a floor covering. -
Tools, nosings, trims, welds, strips
REF:
REF:
Description
A wide range of tile trims, nosings, and other tools are available at Laydex. -
Tremco SX100 Fibre Reinforced Smoothing Compound
REF:
REF:
Description
SX100 is a fiber reinforced, self-levelling flooring compound for interior applications. Designed for application to existing floors prior to the application of floor coverings including: vinyl, carpets, ceramic tiles, wood, etc. -
Tremco SX200 Self Levelling Compound
REF:
REF:
Description
SX200 is a fast drying, self levelling, and pump applied underlayment, for levelling of concrete floors before the installation of floor coverings. Provides good resistance to impact, point loading and abrasion. Ideally suited to floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons. -
Tremco SX220 Fast Setting Self Levelling Compound
REF:
REF:
Description
SX220 is a fast setting cement based smoothing product. SX220 is ideal for use in domestic, light commercial and industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring. -
Tremco SX250 Moisture Tolerant Smoothing Compound
REF:
REF:
Description
SX250 is a pre-smoothing and repair compound for clean, sound, porous substrates. SX250 is specifically designed for preparation of interior applications and can be applied by hand or by pump.
