Accelerated cure
Used with low smoke emission, low toxic floor coverings to give a completely safe installation
Solvent free
Highly resistant to surface water
Tremco SF404 2 Part Epoxy Adhesive
Tremco SF404 2 Part Epoxy Adhesive
Description
SF404 is a two part epoxy based, self-extinguishing adhesive of thixotropic consistency, formulated for ambient temperature curing. SF404 has been specifically developed for the bonding of all resilient (eg. rubber, vinyl and linoleum) and textile floor coverings in areas of high risk and where public safety is the main consideration.
Composition:
A two part solvent free epoxy based adhesive of thixotropic consistency
Open Time/Workability (at +20°C):
45 minutes
Initial Hardening Time (at 25ºC):
4 hours
Specific Gravity:
1.5 - 1.6
Flash Point:
None
Mixing Ratio:
01:01
Service Temperature:
-20°C to +85°C
Coverage:
2 to 2.5 m²/kg using serrated trowel 1.5 mm x 5 mm,
1 m²/kg on coned peduncle back floorings
Final Bond Strength:
4 - 6 days
Full Information:
Check out the full datasheet available in the Downloads section!
