|   

Tremco SX200 Self Levelling Compound

SX200 is a fast drying, self levelling, and pump applied underlayment, for levelling of concrete floors before the installation of floor coverings.

Tremco SX200 Self Levelling Compound

Description

SX200 is a fast drying, self levelling, and pump applied underlayment, for levelling of concrete floors before the installation of floor coverings. Provides good resistance to impact, point loading and abrasion. Ideally suited to floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons.

Make an enquiry


    Categories: , ,

    • Environmentally friendly product: OPC free and 38% recycled content

    • Protein free - will not harbor bacteria

    • Fast setting - walk on after 2 - 4 hours under suitable conditions

    • Up to 30% reduction in environmental impact and global warming potential compared to traditional cementitious screeds

    • Rapid installation – 2000 m² per day for 7 mm thickness, under suitable conditions

    Temperature Resistance:
    +50°C max
    Abrasion Resistance:
    (Taber H22 Wheel/1 kg) 1.7g loss/1000 cycles
    Ultimate Compressive Strength:
    BS EN 196: 35 N/mm²
    Shrinkage:
    < 0.06%
    Thickness:
    3 – 30 mm
    Mix Ratio per 25 kg:
    4.5 – 5 litres water
    Coverage:
    An average thickness of 3 mm will provide a typical coverage rate of 5 m² per mix
    Cure Time (at 20°C) 10 mm thickness:
    at 10°C: Walk On 4 - 8 hours, Full traffic 2 days
    Full Information:
    Check out the full datasheet available in the Downloads section!
    Tremco SX200 Self Levelling Compound - Technical Datasheet
    Download
    Tremco SX200 Self Levelling Compound - Safety Datasheet
    Download
    Tremco SX200 Self Levelling Compound - DOP
    Download
    Tremco Flooring Products – Brochure
    Download

    Related Products

    Related products