Ultra Tile Proflex SP+ES Standard Set Flexible Adhesive

Ultra Tile Proflex SP+ES Standard Set Flexible Adhesive


UltraTile ProFlex SP+ES is a single part, standard set, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability for large format and intricate porcelain, ceramic and natural stone tiling, with exceptional adhesion and flexural capacity that is ideal for situations where vibration may occur.

The adhesive’s unique qualities make it ideal for fixing tiles to most common building substrates including sand/cement render, screeds, brick and block work, heated subfloors, existing tiled surfaces and over boarded wooden floors (for substrates with greater movement or vibration refer to Ultra Tile ProFlex S2). Ultra Tile SP+ES is perfect for interior, exterior, wet and dry conditions, such as conservatories, showers, saunas and swimming pools.

Make an enquiry

    • Extended open time

    • Frost-resistant

    • Suitable for porcelain, glass, mosaic and natural stone tiles

    • Suitable for swimming pools

    • Suitable for use with underfloor heating

    • Internal and external use

    • 3-20 mm bed thickness

    • 2 hour pot life

    • 16 hour set time

    • C2 TE and S1 Classified

    • Suitable for floors and walls

    • Size: 20 kg

    20 kg bags
    Standard conformities:
    EN 12004 Class C2 TE S1
    Bed thickness:
    3 mm-20 mm
    3 mm bed thickness you will require 4.5 kg of material per m2
    Pot Life:
    2 hours depending upon temperature and substrate
    Set Time:
    16 hours dependent upon temperature and substrate
    This product must be stored in unopened bags, clear of the ground in cool dry conditions and protected from excessive drafts
    Shelf Life:
    12 months in above conditions.
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products