Tremco SX070 Feather Finish Compound

Tremco SX070 Feather Finish Compound


SX070 is a rapid drying feather finish compound for interior applications. Ideal for smoothing and repairing the subfloors prior to the installation of a floor covering.

Make an enquiry

    • Short setting and cure time, facilitating a fast track program and minimising disruption

    • Can be applied over well bonded thin film adhesive residues

    • Does not require a primer prior to application

    • Can be used to repair ridges and depressions up to 12 mm, or to achieve a true feather edge

    • Excellent adhesion to a wide range of common flooring substrates, including: concrete, sand/cement screeds, plywood, glazed and unglazed floor tiles, etc.

    A blend of special cements, graded fillers and modified polymers
    Open Time/Workability (at +20°C):
    15 minutes
    Pot Life (at 20°C):
    20 minutes
    An average thickness of 1 mm will give a coverage rate of 14 m² per mix. Up to 50 m² coverage may be achieved when used as a true feather edge.
    Cure Time (at 20°C):
    Floor Covering: After 1 hour, Full Traffic: After 24 hours
    Store in dry shaded conditions between +5°C and +25°C
    Shelf Life:
    6 months when stored as recommended in original unopened packaging
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products