Showing 65–80 of 89 results
-
Index Helastopol SBS 5.5 kg/m2
REF:
REF:
Description
Rot-proof bituminous waterproofing membrane Index Helastopol is an SBS modified bituminous waterproofing membrane. It’s rot-proof, composite reinforcement made of “non-woven” polyester fabric stabilized with fibreglass guarantees dimensional stability which is two to three times higher than that of normal “nonwoven” polyester fabrics. -
Renolit Alkorplan Walkway
REF:
REF:
Description
The RENOLIT ALKORPLAN walkway is a waterproof membrane used for maintenance, access and emergency routes. It is a laminated with flexible PVC and has a woven polyester reinforcement.What the experts have to say
StorageInstructionsStore dry. Rolls to be parallel and in original packing where possible, do not stack in cross form or under pressure. -
RESITRIX® Pipe Penetration Sleeves
REF:
REF:
Description
The RESITRIX® pipe penetration sleeves are prefabricated, moulded sleeves with a weldable RESITRIX® sealing flange, for sealing round roof penetrations with diameters between 35-100mm.What the experts have to say
RESITRIX®Lifetime of 50 YearsThe SKZ institute Würzburg has certified a lifetime of more than 50 years for RESITRIX®. This is more than double the lifetime of a standard roof. Furthermore, RESITRIX® is the only product for which the heat-welded seams have also been certified. -
Index Prominent Vapour Control Layer
REF:
REF:
Description
Waterproofing vapour barrier membrane Index Prominent is an elastoplastomeric distilled polymer-bitumen waterproofing vapour barrier membrane designed with an embossed upper face by index to resolve the problem of waterproofing where insulation panels must be bonded without using molten oxidised bitumen or cold adhesives or mechanical fastening.What the experts have to say
METHOD OF USEAND PRECAUTIONSWhen you start warming-up the PROMINENT dimpled face, the flame of gas burner will be bluish. By keeping on torching in the same area, flame colour will turn from bluish into red/orange: this means that the PROMINENT surface is ready for application of the insulating boards. -
Renolit Alkor Separation Fleece
REF:
REF:
Description
Protection and separation layer. Needle felt synthetic fleece for use in RENOLIT roofing systems.What the experts have to say
RenolitSeparation FleeceRenolit Alkor Separation Fleece meets all requirements for protection and separation layers. It will not rot. -
RESITRIX® Corner Parts
REF:
REF:
Description
When installing RESITRIX® waterproofing membranes, corners are formed using two-dimensional prefabricated corner pieces made from RESITRIX® SK W Full Bond. This method enables quick and convenient formation of internal and external corners. The shaped pieces comprise a circle with a rounded cut-out notch, a full circle and an oval tongue.What the experts have to say
RESITRIX®Lifetime of 50 YearsThe SKZ institute Würzburg has certified a lifetime of more than 50 years for RESITRIX®. This is more than double the lifetime of a standard roof. Furthermore, RESITRIX® is the only product for which the heat-welded seams have also been certified. -
Index Selftene Self-Adhesive Underlay
REF:
REF:
Description
No need for hot bitumen, flames or adhesives INDEX SELFTENE is a self-adhesive polymer modified bituminous vapour barrier onto which the insulating panels can be glued by simple cold pressure without the need for hot bitumen, flames or adhesives.What the experts have to say
AISPEC-MBP GUIDLINESEN 13970Use SELFTENE in your fully adhered build up to avoid naked flames on site and speed up installation.
-
RESIFLEX® SK Expansion Joint Sealing Strips
REF:
REF:
Description
RESIFLEX® SK is used for waterproofing expansion joints and construction joints on trafficked and non-trafficked roofs as well as for waterproofing below-ground structures. RESIFLEX® SK is also suitable for horizontal to vertical connections.What the experts have to say
RESIFLEX®MaterialRESIFLEX® SK is a self-adhesive, bitumen compatible expansion joint sealing strip, produced from synthetic rubber EPDM. It contains an integral glass fibre reinforcement in the bonding zones and is unreinforced in the expansion zone. The underside is coated with self-adhesive polymer-modified bitumen, with a release film. -
Bond It Bitubond Primer
REF:
REF:
Description
A Highly Penetrative, General Purpose Bitumen Primer A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.What the experts have to say
Bitumen PrimerApplication TipApply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface. -
Pluvitec Pre-formed Corners and Outlets
REF:
REF:
Description
Reliable and economical polymer bitumen corners The pre-formed polymer bitumen corners and drain outlets are manufactured to be reliable and economical but above all 100% compatible with the torch on membranes.What the experts have to say
Pre-formed polymerbitumen drain outletsFully compatible with the torch on membranes, they become one with the waterproofing system. They are adaptable, easy to torch in different situations which arise on roofs, like corners, horizontal drains, etc. -
Renolit Alkor Internal Corner
REF:
REF:
Description
Internal PVC corners designed to provide an additional protection layer around awkward areas which are vulnerable to getting scuffed or stretched.What the experts have to say
GeneralaccessoriesAll roofing accessories are suitable for use in roof systems with the RENOLIT ALKORPLAN A, F, L and LA. -
RESITRIX® Lightning Conductor System
REF:
REF:
Description
RESITRIX® Lightning Conductor System is a mounting system for routing and attaching lightning conductor rods with a max. diameter of 10 mm onto flat roof constructions.What the experts have to say
RESITRIX® Lightning Conductor SystemInstallationThe system consists of a circular plate (Ø 11cm) made from synthetic material, into which the clip for the lightning conductor rod can be screwed and horizontally aligned. A shaped patch of heat-weldable RESITRIX® MB which comes pre-applied to the plate, is then used to attach the RESITRIX® Lightning Conductor System to the roof system. -
Pluvitec Pratiko Mastic
REF:
REF:
Description
A Flexible Bituminous Mastic PRATIKO MASTIC is a flexible bituminous mastic reinforced with synthetic fibres which, once dry, forms a plasticized layer with excellent adhesion. PRATIKO MASTIC has an excellent adhesion and durability on bituminous surfaces, galvanized sheets, smooth and corrugated metal sheets, concrete, fibre cement, etc. which remains constant in time. The product has excellent resistance to aging, U.V. ray and atmospheric aggression. PRATIKO MASTIC can also be applied at temperatures below 0°C, on slightly humid surfaces and is compatible with all types of... -
Renolit Alkor External Corner
REF:
REF:
Description
External PVC corners designed to provide an additional protection layer around awkward areas which are vulnerable to getting scuffed or stretched.What the experts have to say
GeneralaccessoriesAll roofing accessories are suitable for use in roof systems with the RENOLIT ALKORPLAN A, F, L and LA. -
RESITRIX® Scissors
REF:
REF:
Description
Particularly due to their sharpness, RESITRIX® scissors provide optimal flexibility and allows for clean and accurate installation of RESITRIX® waterproofing membranes.What the experts have to say
RESITRIX®System AccessoriesEvery flat roof is different, has its edges, penetrations or special requirements for installation or individual aesthetic requirements – these are the reason for RESITRIX® extensive range of accessories where all components optimally match to one another and form a perfect functional unit. -
Bond It Patination Oil
REF:
REF:
Description
A protective coating for new and restored leadwork. Specially designed to minimize unsightly staining on newly applied lead and other materials. Provides even colour and protects surfaces.What the experts have to say
Patination OilPreparation TipThe lead to be treated should be clean, dry and free from cement, dust and loose debris that may affect adhesion.
