Showing 177–192 of 192 results

• Tremco SX300 High Performance Latex Underlayment

  REF:
  
  REF:
  

  Description

  SX300 is a two part general purpose smoothing underlayment for interior applications. SX300 is semi levelling and is specifically designed for the preparation and smoothing of interior subfloors prior to the application of a liquid applied damp proof membrane and receiving a floor covering.
  Read more

• Tremco SX300-NA Self Priming Smoothing Compound

  REF:
  
  REF:
  

  Description

  SX300 NA is a two part general purpose smoothing underlayment for interior applications. SX300 NA is specifically designed for the preparation and smoothing of interior subfloors prior to the application of a liquid applied damp proof membrane and receiving a floor covering.

  What the experts have to say

  

  Application

  Guidelines

  SX300 NA should be applied directly after mixing by pouring a ribbon of material along the wet edge and then trowelled to form a smooth, even finish. The effective use of spike rolling can reduce visible trowel marks.
  Read more

• Tremco SX301 Fast Set Latex Smoothing Underlayment

  REF:
  
  REF:
  

  Description

  SX301 is a fast setting cement based smoothing product. SX301 is ideal for use in domestic, light commercial and light industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring.
  Read more

• Tremco SX302 Moisture Tolerant Latex Underlayment

  REF:
  
  REF:
  

  Description

  SX302 is a moisture tolerant cement based latex underlayment. SX302 is ideal for use in domestic, light commercial and light industrial environments as an underlayment, prior to application of carpet, wood and vinyl flooring.
  Read more

• Schonox Joint Sealing Tape

  REF:
  
  REF:
  

  Description

  SCHÖNOX ST SEALING TAPE is a crosswise elastic, double-sided fleece-cladded special seal tape. In combination with SCHÖNOX bonded sealing’s to tighten wall- and wall-/floor connections. Also suitable for joints as well as for connections with danger of cracking and penetrations.

  What the experts have to say

  

  Joint Sealing Tape

  Requirements of substrate

  The substrate should have adequate strength, load bearing capacity, dimensional stability and permanent dryness. Ensure the area is free of residues which reduce adhesion, e.g. dust, dirt, oil, fat and loose particles. Surface treatments or any "friable" areas of the subfloor must be mechanically removed and the subfloor repaired with SCHÖNOX levelling compounds as required.
  Read more

• Tremco SX500 Rapid Drying Smoothing Compound

  REF:
  
  REF:
  

  Description

  SX500 is a protein free moisture tolerant, fast drying, and smoothing compound for interior applications. SX500 is designed for application to existing floors prior to the application of floor coverings including: vinyl, carpets, ceramic tiles, wood, etc.
  Read more

• Schonox HA Tanking Membrane

  REF:
  
  REF:
  

  Description

  Ready mixed, roll-able waterproof sealing membrane for installations of waterproof sealing under ceramic tiles in residential and commercial wet rooms in interior areas.

  What the experts have to say

  

  Substrates

  Schonox HA

  Subfloors must be smooth, sound, clean, dry and free of any contaminants which may hinder adhesion. Surface treatments or any “friable” areas of the subfloor must be mechanically removed back to a sound base and the substrate repaired with SCHÖNOX repair compounds as required.
  Read more

• Tremco ES100 Single Coat Universal Epoxy DPM

  REF:
  
  REF:
  

  Description

  ES100 is a two part, epoxy based damp proof membrane. ES100 has been developed specifically for suppressing residual moisture in concrete and sand/cement subfloors and provides a guaranteed surface damp proof membrane with a single coat liquid application.
  Read more

• Schonox MS-Elastic

  REF:
  
  REF:
  

  Description

  Universal elastic parquet adhesive. MS-Elastic is used for bonding all types of parquet on suitable substrates in interior areas as well as in rooms with expected fluctuations in room climate. SCHÖNOX MS-Elastic is suitable for bonding: Block parquet; Oily types of wood; Strip parquet; Mosaic parquet; Parquet blocks RE/WE woodblock Edgewise laminated flooring Suitable solid, double or triple layer ready-made parquet Solid floorboards 10 mm solid parquet (see “instructions”) in floor areas on all absorbent and non-absorbent substrates, interior
  Read more

• Tremco ES600 Moisture Vapour Suppressant

  REF:
  
  REF:
  

  Description

  ES600 is a ready for use, one part, water-based moisture vapor suppressant. A surface moisture vapor suppressant developed to suppress residual construction moisture in cementitious subfloors including power floated concrete and sand/cement screeds.

  What the experts have to say

  

  Tremco ES600

  Accreditations

  EC1. The tested product complies with the requirements of BREEAM (2008); EN 13999.
  Read more

• Schonox Emiclassic Pressure Sensitive Adhesive

  REF:
  
  REF:
  

  Description

  Universal pressure sensitive dispersion adhesive. For all flexible coverings, for textile coverings with PVC, PU backing, filler-free backing, linoleum coverings, synthetic rubber coverings and impact sound insulation underlay on absorbent and non-absorbent substrates in interior areas.
  Read more

• Schonox SHP Acrylic Primer

  REF:
  
  REF:
  

  Description

  Special acrylic primer for use on sound, smooth, non-porous substrates in interior areas. Especially prior to use of Schönox underlayment on ceramic tiles, old vinyl, linoleum and rubber coverings.

  What the experts have to say

  

  Schonox SHP

  Requirements of substrate

  Subfloors must be smooth, sound, clean, dry and free of any contaminants which may hinder adhesion. Surface treatments or any “friable” areas of the subfloor must be mechanically removed and the subfloor repaired with SCHÖNOX leveling compounds as required. On porous substrates use SCHÖNOX VD.
  Read more

• Schonox VD Universal Primer

  REF:
  
  REF:
  

  Description

  Universal primer for absorbent and non-absorbent substrates for use as a primer with SCHÖNOX levelling compounds and suitable for the pre-treatment of absorbent, non-absorbent and smooth substrates on walls and floors.
  Read more

• Tremco CS100 Epoxy Primer

  REF:
  
  REF:
  

  Description

  CS100 Epoxy Primer is designed to prime Tremco surface damp proof membranes and other non-porous surfaces before the application of TREMCO smoothing compounds. Specifically formulated for interior use on particularly smooth or dense surfaces.
  Read more

• Tremco CS150 Acrylic Primer

  REF:
  
  REF:
  

  Description

  CS150 Acrylic Primer is a universal primer for porous substrates. CS150 Acrylic Primer is specifically designed for use as a primer for polymer screed applications or beneath smoothing compounds on porous substrates.
  Read more

• Tremco CS175 Epoxy Primer for Porous Substrates

  REF:
  
  REF:
  

  Description

  CS175 is a two part water based epoxy primer. CS175 Epoxy Primer for Porous Substrates provides a breathable sealer for calcium sulfate screeds. Additionally, it is suitable for priming new and existing cementitious screeds, concrete, brick and blockwork. May be used as a low viscosity primer for epoxy paint coatings on prepared power floated concrete.
  Read more