Showing all 10 results
-
Bond It Brick Patio Cleaner
REF:
REF:
Description
A powerful acid based cleaner that will remove cement and mortar splashes, grime, oil, grease and other difficult-to-remove stains, from brickwork, patios, garages, paving, concrete floors and warehouses. Application Gloves, overalls, boots and goggles should be worn at all times during application. Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar. Before commencing a full clean down, test on... -
Bond It Dust Proofer & Hardener
REF:
REF:
Description
A premium quality, chloride-free, low viscosity liquid that penetrates and chemically seals concrete. Produces a hard wearing, non-dusty surface. Suitable for use on garage, warehouse, factory or workshop floors. Application Gloves, boots and goggles should be worn at all times during application. Ensure all surfaces are clean, dry and free from oil, grease, paint or polish to maximise the effectiveness of this product. If in doubt use Bond It BRICK & PATIO CLEANER to remove any stubborn stains before washing down and applying Bond It... -
Bond It Frost Proofer & Rapid Hardener
REF:
REF:
Description
A high performance building chemical that increases frost resistance and accelerates setting time of cement by improving the rate of hydration. Specially developed for brick laying and rendering, etc. at low and sub-zero temperatures. Added to the mix, this product will improve workability and increase strength gain and resistance to water penetration. It allows up to a 15% reduction of gauging water, and can also reduce curing times and shrinkage. Will not degrade steelwork or wall tiles as formulation is chloride-free. Conforms to: EN934-2 (2009) -
Bond It Mould Stop
REF:
REF:
Description
A premium grade, powerful cleaning agent formulated to remove mould, mildew, organic growth and lichen, etc. Removes all types of organic growth, algae, etc. from brick concrete, wood, tarmacadam, painted surfaces, decking, garden furniture, paviours, plastic and glass. Can also be used on fabric awnings. Can be applied internally and externally. -
Bond It Patio Blaster
REF:
REF:
Description
A concentrated disinfectant for the removal and prevention of green mould, lichens and algae on hard surfaces. A simple 3 step system – dilute, apply, leave to dry! For use on: patios, tarmac and asphalt driveways, fencing, decking, pathways, roofing, painted & glazed pots, garden furniture and ornaments, weatherboard, brickwork, masonry, York stone, concrete, pebbledash, garden sheds, greenhouses, conservatories, gravestones, gravel, PVC, caravans, tennis courts and other artificial play/sports surfaces. -
Bond It Silicone Ultra Waterseal
REF:
REF:
Description
A premium grade, solvent-free silicone waterseal. Provides a micro-porous water-repellent coating for masonry work which, while repelling exterior water. It allows the emission of water vapour ensuring the interiors and cavity walls remain dry. Used as a masonry water proofer suitable for use on brick, stone, concrete and unglazed tiles. It protects the surface against water and frost, providing a micro-porous coating which does not change the aesthetic appearance of a building. A secondary benefit of the product is to repel waterborne dirt and resist fungal... -
Bond It Patioseal
REF:
REF:
Description
A premium grade, solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages as well as dirt and grime build-up. For enhancing the present colour and greatly extending the lifespan of block paving driveways or paths and patios. -
Bond It High Strength Brick Acid
REF:
REF:
Description
A super strength (18% hydrochloric acid) cleaner that will remove cement and mortar splashes from brickwork, paving, concrete floors and warehouses. -
Bond It Waterseal Masonry Waterproofer
REF:
REF:
Description
A premium waterseal designed to repel water from exterior masonry work which allows walls to breathe, reducing the risk of damage caused by water and frost. Used as a masonry water-proofer suitable for use on brick, stone and concrete. It protects against water and frost, providing a breathable coating which does not change the physical appearance of a building. A secondary benefit of the product is to repel water-borne dirt and resist fungal growth as well as help reducing heating costs, as energy is not... -
Bond It Mould Release Oil
REF:
REF:
Description
A chemical release agent for mould and shutter surfaces prior to casting concrete, giving a clean release. After removal of formwork the concrete will have a smooth, uniform, hard finish with reduced incidence of blow holes.
