- Air & Weather Tightness
- Airtight & Weatherproof Membranes
- Airtightness Solutions
- EPDM Façade Solutions
- External Weather Seals
- Building Products
- Artificial Grass
- Breather Membranes
- Building Products
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Oxide Paint
- Radon & Gas Protection
- Roofing & Bituminous Products
- Silicones & Sealants
- STEGU Decorative Stone
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tyvek® Building Envelope Solutions
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Commercial Carpet
- Commercial Vinyl
- Floor Coating Products
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wetroom Solutions
- Passive Fire Protection
- Resin Surfaces
- Anti-Static Resins
- Cementitious Products
- Decorative & Commercial Resin Flooring
- Decorative Quartz Resin Finishes
- Epoxy Resin Floor Coating
- Epoxy Resin Floor Screeds & Self Smoothing Finishes
- Grip/Slip Resistant Systems
- Polyurethane Floor Coatings
- Polyurethane Resin Screeds
- Resin Bound / Resin Bonded Systems
- Single Pack Floor Coatings
- Wall Coatings
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Roof Coatings
- Roof Slates
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- SIP Roof Panels
- Standing Seam Systems
Showing all 11 results
DescriptionPE leaf guard with a universal diameter (80 mm – 125 mm).
What the experts have to sayRenolitAccessoriesAll roofing accessories suitable for use in roof systems with the RENOLIT ALKORPLAN, RENOLIT ALKORTEC and RENOLIT ALKORTOP roofing membranes bear the RENOLIT ALKORPLUS designation.
Leister Triac ST – Hot Air GunREF:REF:
DescriptionHandiness, reliability and versatility are the key arguments in favour of the Triac ST. Its two-component handle gives users a perfect grip, while the low weight of less than 1 kg ensures an optimum weight balance.
What the experts have to saySwissthoroughness:The air filters on both sides can easily be removed and cleaned. This ensures optimum air flow and maximum power output.
Steinel HG 2420 E – Hot Air GunREF:REF:
DescriptionSTEINEL HG 2420 E Hot Air Gun A hot air gun for roofing membranes Reliability for all demands. Electronically controlled HG 2420 E hot air tool. 2200 W, infinitely variable temperature setting from 80 – 650 °C in 9 steps by thumbwheel. Airflow regulation in 2 stages from 150l/min to 400l/min. Suitable for construction site use, integrated fine dust filter. Outlet nozzle suitable for screw-on Professsional nozzles. VIEW THE SPECIAL OFFER
Tremco Illmod 600REF:REF:
DescriptionMinimal surface preparation required Pre-Compressed Impregnated Foam Seal for Expansion Joints. Illmod® 600 is a UV stable, pre-compressed, self-expanding, flexible, flame-resistant joint seal. It is a high-density polyurethane foam that is impregnated with a modified acrylic resin and treated with a pressure-sensitive adhesive on one side for ease of installation. Illmod 600 self-expands to fill the joint creating an elastic, vapor-permeable, weathertight seal.
What the experts have to sayGREENGUARDGold CertificationStandard: UL 2818 - 2013 Gold Standard for Chemical Emissions for Building Materials, Finishes and Furnishings. Number: 23107-420 Certification Status: Certified.
Bond It Bitubond Aluminium Solar Reflective PaintREF:REF:
DescriptionReduces heat build-up and gives a reflective finish to bituminous coating A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, aged asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat build-up and gives a reflective finish to bituminous coatings and primed steel. Suitable for the refurbishment of aged steel roofs.
What the experts have to saySolar Reflective PaintApplication TipSTIR VERY THOROUGHLY BEFORE USE. Do not thin. Apply immediately and continue stirring periodically during use. Apply by brush or mohair roller When brushing, use soft bristle brushes applying the lightest of pressure.
Bond It Bitubond Bitumen PaintREF:REF:
DescriptionA solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Suitable for drinking water tanks as it forms an odourless and taint-free bitumen film coating.
What the experts have to sayBitumen PaintPreparation TipThoroughly clean surfaces to be treated. Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer. Surfaces to be treated must be completely free of water.
Bond It Bitubond PrimerREF:REF:
DescriptionA Highly Penetrative, General Purpose Bitumen Primer A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.
What the experts have to sayBitumen PrimerApplication TipApply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.
Bond It Patination OilREF:REF:
DescriptionA protective coating for new and restored leadwork. Specially designed to minimize unsightly staining on newly applied lead and other materials. Provides even colour and protects surfaces.
What the experts have to sayPatination OilPreparation TipThe lead to be treated should be clean, dry and free from cement, dust and loose debris that may affect adhesion.
Bond It SealAcrylREF:REF:
DescriptionA one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.
What the experts have to saySEALACRYLApplication TipDo not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
DescriptionFlat roof PVC vent for use with Single Ply Membrane.
ROOFING PREMIUM SERVICEREF:REF:
DescriptionInitial Roof Survey including thermal imaging Report on findings, proposal and product specification On site visits with site inspection reports Final sign off Insurance backed warranties for material and labour upon completion by an approved certified installer CPD Presentations On site installation training / Supervision CONTACT US TODAY!