Show categories
- Air & Weather Tightness
- Building Products
- Adhesives
- Artificial Grass
- Basta Door Handles & Accessories
- Breather Membranes
- Building Products
- Cleaners
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Handrail
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Meter Boxes
- Oxide Paint
- Personal Protective Equipment
- Radon & Gas Protection
- Roofing & Bituminous Products
- Shelving
- Silicones & Sealants
- STEGU Decorative Stone
- Tapes
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tube & Fittings
- Tyvek® Building Envelope Solutions
- Underslating
- Flooring
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Ceramics
- Commercial Carpet
- Commercial Vinyl
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Linoleum
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wallcoverings
- Wetroom Solutions
- MAPEI
- Passive Fire Protection
- Roofing
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Hot Melt
- Hybrid Liquid Waterproofing Membranes
- Insulation
- Knauf Fall Arrest Sytems
- MPM Liquid Waterproofing
- Roof Coatings
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- Standing Seam Systems
- Uncategorized
Showing 145–160 of 627 results
-
Nullifire FR230 Intucompound Fire Mortar
REF:REF:Description
FR230 Intucompound Fire Mortar FR230 Intucompound is a gypsum based mortar used to reinstate the fire resistance performance of floor & wall constructions where they have been breached with apertures for the penetration of single or multiple services. FR230 provides a safe working platform for loads up to 2.5 kN/m² when installed in full accordance to our recommendations. Usage/purpose FR230 is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing a load bearing capability... -
Nullifire FS702 Intumastic Fire Resistant Acrylic Sealant
REF:REF:Description
Nullifire FS702 Intumastic Fire Resistant Acrylic Sealant FS702 Intumastic is a water based acrylic sealant which cures to give a firm but flexible fire seal. Suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. FS702 is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm. The product has excellent adhesive qualities and can also be used for the bonding and pointing of joints... -
Nullifire FS709 HP Intumescent Sealant
REF:REF:Description
FS709 HP Intumescent Sealant FS709 HP is a high expansion/pressure exerting, graphite intumescent sealant that expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated with services. FS709 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt Coated Batts. -
Nullifire FS712 Intucoat Brush
REF:REF:Description
FS712 Intucoat Brush FS712 Intucoat is a water-based acrylic coating and adhesive, which may be used in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 as a bonding agent and a surface repair coating. -
Nullifire FS719 HP Blue for CPVC
REF:REF:Description
FS719 HP Blue for CPVC FS719 HP Blue for CPVC is a unique sealant developed specifically for CPVC materials. The product has a distinctive blue colour for easy visual identification and traceability. FS719 is a powerful product, designed to close CPVC, only when the pipes are deteriorating under fire conditions. Approved for use by a CPVC pipe manufacturer, and registered as such for use around Flowguard, Blazemaster, Corzan, etc. This advance product has been made available to installers of fire protection and sprinkler systems. CPG... -
Nullifire FS721 Trowel Grade Acrylic Sealant
REF:REF:Description
FS721 Trowel Grade Acrylic Sealant is a single part waterborne fire resistant acrylic sealant. FS721 sealant can provide up to 4 hours fire resistance when used in conjunction with Nullifire FB747 Coated Board System. FS721 is designed to be brush or trowel applied to seal the uncoated edges of FB747, or provide coat back of cables to provide insulation in accordance with EN 1366-3.What the experts have to say
Fire ResistanceFS721 ApplicationUsing a trowel or pallet knife, coat any cut edges of the Nullifire FB747 batt system before installation. Apply a thick layer of FS721 to all areas of contact around the opening of services. Finish joints post installation with a further application of FS721 to all joint lines and any small gaps. -
Nullifire SC803 Intumescent Steel Coating
REF:REF:Description
SC803 Intumescent Steel Coating – On-Site, Water Based SC803 Intumescent Steel Coating is an ultra low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork, optimised to 60 minutes fire resistance. SC803 contains no substances of very high concern. Usage/purpose SC803 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 90 minute protection is also available. SC803... -
Nullifire SC804 Intumescent Steel Coating
REF:REF:Description
SC804 Intumescent Steel Coating – On-Site, Water Based SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern. Usage/purpose SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120-minute protection is also available. SC804 can be used on steel, cast iron... -
Permabase Joint Filler
REF:REF:Description
Permabase Joint Filler is suitable for the joint treatment and skim coating of lightweight fibre-reinforced cement Boards in particular the Permabase Cement Board. It is Grey in colour and should be used when installing PermaBase Cement Boards in order to qualify for the system warranty. -
PermaBase® Cement Board
REF:REF:Description
Cement Board for Both Interior and Exterior Applications PermaBase® brand Cement Board is a rigid substrate made of Portland cement, aggregate and glass mesh that provides an exceptionally hard, durable surface that is able to withstand prolonged exposure to moisture. PermaBase offers a competitive advantage over similar products on the market with its patented EdgeTech® technology. The tapered, reinforced edge design allows for closer nail or screw application to the edge. Double-wrapped edge with EdgeTech technology allows for closer fastener application of nails or screws... -
PermaBase® Cement Board Underlayment
REF:REF:Description
Cement Board Underlayment for Ceramic Tile 1/4″ PermaBase® BRAND Cement Board is used as an underlayment for ceramic tile on floors, countertops, tub decks and outdoor kitchen counters. 1/4″ PermaBase Cement Board is a rigid substrate made of Portland cement, aggregate and glass mesh that provides an exceptionally hard, durable surface that is able to withstand prolonged exposure to moisture. PermaBase offers a competitive advantage over similar products on the market with its patented EdgeTech® technology. The tapered, double-wrapped edge design allows for closer nail... -
Plura Hot Melt
REF:REF:Description
Structural Hot Melt Waterproofing System Plura Hot Melt System is the ideal system for waterproofing solutions. It is specifically designed for buried applications such as flat roofs, green roofs & blue roofs. Plura Hot Melt features a pure polymer-modified SBS bitumen compound formulation, combined with reinforcement mesh and high strength protection membrane to form a weatherproof layer that has a 100% bond to the prepared surfaces. Resulting in a tough, seamless, flexible, self-healing monolithic waterproofing system. Leading to incredibly fast installation speeds, that will last... -
Pluvitec Maxitec Anti-Root
REF:REF:Description
Pre-fabricated membrane designed for use on structures where vegetation is foreseen (ex. roof gardens, buried works, etc.). The excellent and long lasting performance of MAXITEC ANTI-ROOT are given by the sum of the characteristics which provide a very high resistance to both root penetration as well as aggressive chemicals such as fertilizers.What the experts have to say
Maxitec Anti-RootResistanceThe anti-root additive is not in anyway washed out of the compound and resists the heat of the open flame torch during application. -
Pluvitec Protection Board
REF:REF:Description
A bituminous protection board protects against normal site traffic Pluvitec Protection Board is a pre-formed bituminous board modified with a special rigid compound. It is used to protect the waterproofing during backfilling procedures (retaining walls, fixed pavements, cast concrete, etc..) and construction traffic. Also available with mineral slate finish, used as a protective walkway to waterproofing layer on roofs. Protection Board is used also for refurbishment works, as a new supporting element (6 mm version), mechanically fixed. Pluvitec Protection Board also maintains and protects not... -
Pluvitec TECH 500 HP
REF:REF:Description
TECH 500 HP: Modified SBS waterproofing membrane Pre-fabricated waterproofing membrane made of distilled bitumen and elastomeric polymers (SBS). The versions P & PA have a woven non woven single strand composite polyester reinforcement, with good mechanical characteristics and excellent dimensional stability. The V versions have a fibre glass reinforcement, with excellent dimensional stability. The versions PA are self-protected on the upper face with mineral slates which reduce superficial heat absorption improving the durability of the membrane. The self-protected versions have a side selvedge of 10... -
Pluvitec TPE Angular Drain
REF:REF:Description
The angular roof drain with round exit spigot is provided with a 500 mm long drain spigot hich could be easily made longer simply by using a standard plastic pipe.