Showing all 4 results
-
Bond It Bitubond Aluminium Solar Reflective Paint
REF:
REF:
Description
Reduces heat build-up and gives a reflective finish to bituminous coating A light/heat reflective coating that will provide protection against solar degradation and heat gain. It is suitable for use over bituminous coatings, aged asphalt and primed steel. It is a superior alternative to chippings when applied in a two coat application. Reduces heat build-up and gives a reflective finish to bituminous coatings and primed steel. Suitable for the refurbishment of aged steel roofs.What the experts have to say
Solar Reflective PaintApplication TipSTIR VERY THOROUGHLY BEFORE USE. Do not thin. Apply immediately and continue stirring periodically during use. Apply by brush or mohair roller When brushing, use soft bristle brushes applying the lightest of pressure. -
Bond It Bitubond Bitumen Paint
REF:
REF:
Description
A solvent-borne, bituminous black paint for the waterproofing and weather protecting of steelwork and concrete. Used for the protection of ferrous and non-ferrous metals, concrete roofing, felt, fibre cement, corrugated iron, asphalt and wood, against water. Suitable for drinking water tanks as it forms an odourless and taint-free bitumen film coating.What the experts have to say
Bitumen PaintPreparation TipThoroughly clean surfaces to be treated. Rust should be wire brushed to remove as much as possible, any residue must be primed with a rust inhibitor primer. Surfaces to be treated must be completely free of water. -
Bond It Bitubond Primer
REF:
REF:
Description
A Highly Penetrative, General Purpose Bitumen Primer A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.What the experts have to say
Bitumen PrimerApplication TipApply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface. -
Bond It SealAcryl
REF:
REF:
Description
A one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.What the experts have to say
SEALACRYLApplication TipDo not thin. Apply SEALACRYL using either a brush or roller. Treat all details first, in areas where excessive movement may occur additional reinforcement can be incorporated into the coating. SEALACRYL can be applied in one coat, but experience has shown that a two coat application ensures a greater uniformity of coating thickness.
