- Air & Weather Tightness
- Building Products
- Artificial Grass
- Basta Door Handles & Accessories
- Breather Membranes
- Building Products
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Meter Boxes
- Oxide Paint
- Personal Protective Equipment
- Radon & Gas Protection
- Roofing & Bituminous Products
- Silicones & Sealants
- STEGU Decorative Stone
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tube & Fittings
- Tyvek® Building Envelope Solutions
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Commercial Carpet
- Commercial Vinyl
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wetroom Solutions
- Passive Fire Protection
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Hot Melt
- Hybrid Liquid Waterproofing Membranes
- Roof Coatings
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- Standing Seam Systems
Showing 1–16 of 20 results
Nullifire FB750 Intubatt Coated BattREF:REF:
DescriptionFB750 Intubatt Coated Batt FB750 Intubatt is a lightweight fire barrier comprising of a rock mineral fibre board with an uniquely identifiable ablative coating, containing Optifire unique traceability identifier. Usage/purpose FB750 is designed to reinstate the fire performance of compartment walls and floors which have been breached by penetrating services, providing a fire, smoke, thermal, acoustic and air pressure seal. FB750 must be used in conjunction with FS702 Intumastic to be suitable for sealing around the following service types: non-combustible pipes, cable trays, ladders and...
Nullifire FB770 Intudeck – Timber Floor UpgradeREF:REF:
DescriptionFB770 Intudeck – Timber Floor Upgrade FB770 Intudeck is a rock mineral fibre board coated on one side with a smoke and fire resistant sealant. Light weight and quick to install, FB770 can be cut to suit on site and fitted using compression and FS702 Intumastic bonding between joists. Usage/purpose Ideal where decorative ceilings cannot be disturbed or accessed due to lower floor occupancy. FB770 may be used to upgrade the compartment capability to 90 minutes fire integrity and insulation (EI 90) whilst maintaining the...
Nullifire FF197 Fire Rated PU Construction FoamREF:REF:
DescriptionFF197 Fire Rated PU Construction Foam FF197 is a modified, single component, fire rated polyurethane foam used to seal door frames, window frames and linear gaps throughout the fire rated areas of a building. Usage/purpose FF197 is used to seal door frames and linear gaps throughout the fire rated areas of a building. Always read SDS, pre-application guidance and relevant application detail prior to application. Ensure the latest documents are downloaded prior to every project commencement. Use in well ventilated conditions. As with all PU...
Nullifire FJ240 Spanatherm Cavity BarrierREF:REF:
DescriptionFJ240 Spanatherm Cavity Barrier FJ240 Spanatherm is a strong preengineered rock fibre movement-joint fire seal, vertical fibre orientation, that allows significant movement accommodation at the same time as providing fire integrity, insulation and an effective smoke seal. FJ240 is a dense rock mineral fibre board Class A1 core with a BC0 aluminium foil applied to two faces. This provides a vapour barrier and a smoke seal when correctly sealed.
Nullifire FP170 Intucollar Intumescent Pipe CollarREF:REF:
DescriptionFP170 Intucollar Intumescent Pipe Collar FP170 Intucollar comprises of a stainless steel shell and a reactive intumescent lining. FP170 expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated by combustible pipes.
Nullifire FP300 Intumescent Pipe WrapREF:REF:
DescriptionAn effective barrier to the spread of smoke and fire for up to 2 hours FP300 is a simple to use self-adhesive intumescent pipe wrap used for sealing plastic and composite pipe penetrations. FP300 is used to stop the spread of smoke and fire along services that pass through compartment walls and floors. The wrap fits around the circumference of the pipe within the depth of the substrate. In the event of a fire FP300 prevents the passage of fire and smoke by closing off...
What the experts have to sayFire ResistanceFP300 SuitabilityFP300 is suitable for use with all common plastic and composite pipes (PVC, ABS, PE, PP, PB). Typical areas of use include health and leisure facilities, schools, universities, retail stores and industrial buildings.
Nullifire FP302 Intustrap Intumescent StrapREF:REF:
DescriptionFP302 Intustrap Intumescent Strap FP302 Intustrap is a rubber based product with graphite impregnation, designed to close off combustible elements whilst maintaining compartmentation. FP302 is also a component product incorporated within many Nullifire fire stopping products.
Nullifire FP333 Trunking InfillREF:REF:
DescriptionFP333 Trunking Infill FP333 Trunking Infill is a fire resistant compressible foam strip layered with high expansion intumescent material produced in three sizes. In a fire, the intumescent expands and hardens providing a fire and cold smoke barrier. Usage/purpose FP333 is designed to provide a permanent fire barrier within trunking boxes passing through fire compartment walls. They are of particular use where there are regular changes in cabling requiring frequent removal and replacement, for example in computer or communication installations. Always read SDS, pre-application guidance...
Nullifire FR230 Intucompound Fire MortarREF:REF:
DescriptionFR230 Intucompound Fire Mortar FR230 Intucompound is a gypsum based mortar used to reinstate the fire resistance performance of floor & wall constructions where they have been breached with apertures for the penetration of single or multiple services. FR230 provides a safe working platform for loads up to 2.5 kN/m² when installed in full accordance to our recommendations. Usage/purpose FR230 is used to stop the spread of fire and smoke around services that pass through compartment walls and floors, whilst providing a load bearing capability...
Nullifire FS702 Intumastic Fire Resistant Acrylic SealantREF:REF:
DescriptionNullifire FS702 Intumastic Fire Resistant Acrylic Sealant FS702 Intumastic is a water based acrylic sealant which cures to give a firm but flexible fire seal. Suitable for use in various construction joints offering up to 30% movement capability whilst providing an excellent acoustic and air seal. FS702 is suited for use around non-combustible services, cables, rock fibre insulated non-combustible pipes, using a minimum depth of 25 mm. The product has excellent adhesive qualities and can also be used for the bonding and pointing of joints...
Nullifire FS709 HP Intumescent SealantREF:REF:
DescriptionFS709 HP Intumescent Sealant FS709 HP is a high expansion/pressure exerting, graphite intumescent sealant that expands when exposed to fire, reinstating the fire performance of compartment walls and floors which have been penetrated with services. FS709 can be used on flexible walls & rigid walls (100 mm or wider), rigid floors (150 mm or wider), and also with FB750 Intubatt Coated Batts.
Nullifire FS712 Intucoat BrushREF:REF:
DescriptionFS712 Intucoat Brush FS712 Intucoat is a water-based acrylic coating and adhesive, which may be used in conjunction with FB750 Intubatt, FB770 Intudeck and FJ220 Intubatt 3 as a bonding agent and a surface repair coating.
Nullifire FS719 HP Blue for CPVCREF:REF:
DescriptionFS719 HP Blue for CPVC FS719 HP Blue for CPVC is a unique sealant developed specifically for CPVC materials. The product has a distinctive blue colour for easy visual identification and traceability. FS719 is a powerful product, designed to close CPVC, only when the pipes are deteriorating under fire conditions. Approved for use by a CPVC pipe manufacturer, and registered as such for use around Flowguard, Blazemaster, Corzan, etc. This advance product has been made available to installers of fire protection and sprinkler systems. CPG...
Nullifire FS721 Trowel Grade Acrylic SealantREF:REF:
DescriptionFS721 Trowel Grade Acrylic Sealant is a single part waterborne fire resistant acrylic sealant. FS721 sealant can provide up to 4 hours fire resistance when used in conjunction with Nullifire FB747 Coated Board System. FS721 is designed to be brush or trowel applied to seal the uncoated edges of FB747, or provide coat back of cables to provide insulation in accordance with EN 1366-3.
What the experts have to sayFire ResistanceFS721 ApplicationUsing a trowel or pallet knife, coat any cut edges of the Nullifire FB747 batt system before installation. Apply a thick layer of FS721 to all areas of contact around the opening of services. Finish joints post installation with a further application of FS721 to all joint lines and any small gaps.
Nullifire SC803 Intumescent Steel CoatingREF:REF:
DescriptionSC803 Intumescent Steel Coating – On-Site, Water Based SC803 Intumescent Steel Coating is an ultra low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork, optimised to 60 minutes fire resistance. SC803 contains no substances of very high concern. Usage/purpose SC803 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 90 minute protection is also available. SC803...
Nullifire SC804 Intumescent Steel CoatingREF:REF:
DescriptionSC804 Intumescent Steel Coating – On-Site, Water Based SC804 Intumescent steel coating is a very low VOC, borate free, APEO free, water-based, thin film intumescent coating for the protection of structural steelwork. SC804 contains no substances of very high concern. Usage/purpose SC804 is optimised to provide 90 minutes fire resistance to ‘I’ section beams and columns, hollow columns, hollow beams, cellular beams, concrete filled hollow columns and solid steel tension rods. Limited 120-minute protection is also available. SC804 can be used on steel, cast iron...