Showing 17–20 of 20 results

• Nullifire FF197 PU Foam

  REF:
  
  REF:
  

  Description

  FF197 is a modified, single component, fire rated polyurethane foam. FF197 is used to seal linear gaps throughout the fire rated areas of a building.

  What the experts have to say

  

  Preparation

  FF197 PU Foam

  Always carry out a test to confirm compatibility prior to use. Protect floor coverings with paper or a plastic film. The surfaces must be dry, solid, stable. Remove all loose particles, dust and grease. A speedier cure can be attained by moistening the substrates if needed.
  Read more

• Nullifire SC801 Water-Based Intumescent Basecoat

  REF:
  
  REF:
  

  Description

  SC801-120 Intumescent Basecoat is a waterborne, white, thin film intumescent coating for the protection of internal structural steelwork. SC801-120 can provide up to 120 minutes fire resistance.

  What the experts have to say

  

  Nullifire SC801

  Application

  Airless spray equipment is recommended for application. SC801 may be applied up to a maximum wet film thickness of 1.2 mm in a single spray coat comprising of several quick passes. Brush/Roller application is also achievable. See datasheet in the downloads section for more details.
  Read more

• Nullifire SC802 Water-Based Intumescent Basecoat

  REF:
  
  REF:
  

  Description

  SC802 Intumescent Basecoat is a water-based, white, thin film intumescent coating for the protection of internal structural steelwork. SC802 can provide up to 60 minutes fire resistance. It can be applied to a smooth matt finish. A compatible top-seal can be applied if a decorative finish is required.

  What the experts have to say

  

  Nullfire SC802

  Application

  Airless spray equipment is recommended for application. SC802 may be applied up to a maximum wet film thickness of 1.0 mm in a single spray coat comprising of several quick passes. Brush/Roller application is also achievable. See datasheet in the downloads section for more details.
  Read more

• Nullifire FS703 Neutral Cure, Fire Rated Silicone

  REF:
  
  REF:
  

  Description

  FS703 Silicone Sealant is a single-part alkoxy-based fire resistant, elastomeric, neutral cure silicone sealant. Provides up to 4 hours fire protection at internal and external building gaps and movement joints. FS703 is designed for sealing joints in compartment walls and floors, Gaps between frames and structures, at junctions of different materials.

  What the experts have to say

  

  Nullifire FS703

  Preparation

  Clean all surfaces of loose particles, moisture, oils, grease and corrosive materials. Abrade painted or shiny surfaces. Check specification is suitable for movement, fire rating and gap size.
  Read more