Showing 1–16 of 22 results
-
Hertalan EPDM Strip Membrane
REF:
REF:
Description
With hertalan EPDM strips you opt for quality, flexibility and convenience. You can work on virtually any substrate. That makes hertalan EPDM strips the ideal solution for Damp Proof Course applications in cavity walls, around window frames and in curtain walls.What the experts have to say
Installation TipEPDM Strip MembraneHertalan EPDM façade systems are applied without naked flame and at a minimum surrounding and material temperature of 5°C. It is important to apply Hertalan façade systems with clean materials and appropriate tools. Every surface in the construction where Hertalan EPDM façade systems are applied, must be smooth, dry, clean and free of oil, grease and sharp objects. -
Hertalan FS14 Adhesive Paste
REF:
REF:
Description
Hertalan FS14 is a high-quality adhesive glue for façade application. This sealant can be used on both horizontal and vertical surfaces. Coverage approx. 7 linear metres for a cartridge (pea sized bead).What the experts have to say
Directions For UseFS14 Adhesive PasteHertalan fs14 is ready-to-use and must not be diluted or mixed with other products. The glue may be used exclusively in dry weather at ambient temperatures of at least 5 °C. The base to which hertalan fs14 is applied must be even, clean, undamaged, dry and free of oil or grease. -
Hertalan KS137 Contact Adhesive
REF:
REF:
Description
A ready-for-use contact adhesive which has been developed especially for adhering EPDM membranes both vertically and horizontally onto surfaces such as wood, bitumen, masonry material, lead and suitable faced rigid thermal insulation boards, etc.What the experts have to say
Directions for useKS137 Contact AdhesiveHERTALAN® KS137 must not be thinned or mixed with other products. The adhesive must only be processed in dry weather conditions at temperatures of at least 5 °C. The material and the base to be glued must also be dry and clean. HERTALAN® KS137 should be applied with a stiff brush or fleece roller. -
Hertalan KS96 Primer
REF:
REF:
Description
Hertalan KS96 is a primer based on polyurethane resin and solvents. The primer is applied on porous substrates to improve adhesion. The usage will amount to approximately 100-250 g/m², depending on the substrate. Available in 1 litre cans.What the experts have to say
InstallationtipWhen an EPDM strip is installed on a porous surface a primer has to be applied first. This has also to be considered for concrete surfaces covered with shuttering oil. First roughen the surface a little bit and than apply the primer. (Use the hertalan ks96 primer). -
Hertalan Pre-fabricated Corners
REF:
REF:
Description
Hertalan Pre-fabricated Corners are unreinforced vulcanised EPDM internal and external corners, also available with EW welding strip.What the experts have to say
Hertalan AccessoriesRoofing SystemsDuring application of the different Hertalan roofing systems, details must be integrated in the waterproofing layer. Special Hertalan accessories are developed to solve those situations. So you are assured of a complete and complementary EPDM roofing system. -
Hertalan Rainwater Outlet
REF:
REF:
Description
A Rainwater outlet of PE fitted with a sleeve of unreinforced vulcanised EPDM, also available with EW welding strip. The oulet has a 400mm PE pipe with an EPDM flange and is available in 90 and 45 degrees angles. The Flange size is between 300 – 400 mm.What the experts have to say
Hertalan AccessoriesRoofing SystemDuring application of the different Hertalan roofing systems, details must be integrated in the waterproofing layer. Special Hertalan accessories are developed to solve those situations. So you are assured of a complete and complementary EPDM roofing system. -
Illbruck FM230 Pro Foam Window
REF:
REF:
Description
FM230 Pro Foam Window provides sound insulation around window and door frames FM230 Pro Foam Window is a one part, moisture curing polyurethane expanding foam which is gun applied and is particularly suited for thermal and sound insulation around window and door frames. It has MPA tested elasticity and ‘winter foam’ guarantee in application temperatures as low as 0°C.What the experts have to say
Usage/PurposeIllbruck FM230Illbruck FM230 is suitable for cavity filling, insulating and bonding. It has excellent adhesion to brick, block, stone, plaster and cementitious materials as well as wood, metal and a variety of plastics. Achievable sound insulation index of 60 dB in the joint. -
Illbruck FM330 Pro Foam Air Seal
REF:
REF:
Description
FM330 Pro Foam Air Seal is a rapid curing, highly elastic gun grade polyurethane foam and is ideal for use as an air tight gap filler for general construction joints.What the experts have to say
Illbruck FM330Use/PurposeFM330 is suitable for applications such as sealing wall to ceiling joints and pipe & service penetrations. The movement accommodation factor (MAF) of 35% ensures that the integrity of the seal is maintained in the event of movement and settlement. -
Illbruck FS500 Frame & Façade Silicone
REF:
REF:
Description
FS500 is one-part, neutral curing, low modulus and low odour silicone sealant suitable for perimeter joint sealing applications with high movement capability. It has excellent adhesion to most porous substrates including masonry, brick, aluminium, PVC-U, polycarbonate, polyacrylate, wood, glass and glazed surfaces.What the experts have to say
Use:Expansion & Curtain Wall JointsFS500 is ideal for use in: expansion & curtain wall joints, perimeter joints around windows or doors, panel joints between most common substrates, heel and toe beads, polycarbonate glazing and other general joint sealing applications. -
Illbruck ME003 VCL
REF:
REF:
Description
ME003 is a 3-ply co-extruded PE membrane which has been developed as a vapour barrier. The innovative vapour barrier membrane meets virtually all the demands of professional practice. It protects the construction and insulation by providing a vapour and air-tight seal.What the experts have to say
Usage:Internal WallsApply ME003 from the roll, fixing each sheet with staples or OT301 Endurance Adhesive to the structure. It is beneficial to reduce the number of junctions where possible to maximise performance. Membrane overlap of not less than 50 mm is recommended. More details available in the Downloads section! -
Illbruck ME315 Total Protection Tape
REF:
REF:
Description
Illbruck ME315 is a special protection tape with solvent free modified acrylic dispersion adhesive.What the experts have to say
Usage/PurposeInternal & External WallsSingle-sided adhesive tape for interior and exterior use, providing a high performing air and weather-tightness seal. Suitable for a wide variety of applications, including sealing of sheathing boards and the durable bonding of illbruck vapour barrier and breather membranes. -
Illbruck ME316 UV Stable Airtight Tape
REF:
REF:
Description
ME316 is a special PP fleece with waterproof solid adhesive. This single-sided adhesive tape for interior and exterior use, provides a high performing air and weather-tightness seal.What the experts have to say
Usage:Internal & External WallsSuitable for a wide variety of applications, including the durable bonding of illbruck commercial vapour barrier as well as breather membranes and the sealing of sheathing boards. Particularly suited for sealing of joints between timber panels to maintain long-term performance. -
Illbruck ME317 Internal Membrane Tape
REF:
REF:
Description
ME317 is a single-sided adhesive reinforced paper tape designed for the airtight bonding of overlaps in illbruck vapour barrier and membranes for interior use.What the experts have to say
Usage:Internal WallsApplication: Surfaces must be dry and free of oil, grease, dust and other anti-adhesive components. Bonding to frozen surfaces is not possible. The substrate must offer suffi cient load-bearing capacity. On porous or damp substrates or at low temperatures, the use of primer ME904 is recommended. More details in the Downloads section! -
Illbruck ME402 Compriband Ali-Tape
REF:
REF:
Description
ME402 Compriband Ali-Tape PB is a high performance sealant tape which consists of a plasto-elastic butyl rubber adhesive / sealant applied to one side of an aluminised polyester film.What the experts have to say
Use:Internal & ExternalME402 Compriband Ali-Tape PB is intended for internal and external sealing. It can also be used in the repair of joints and overlaps in a wide variety of applications which includes amongst others shop fitting, facades, conservatories, air conditioning, and ventilation. -
Illbruck ME500 Duo Flexible Window Membrane
REF:
REF:
Description
ME500 is an intelligent window membrane providing perimeter window seal for airtight internal & weathertight external joints.What the experts have to say
Agrément Certificate12/4891Illbruck ME500 Duo Flexible Window Membrane is BBA accredited for use around windows and doors to provide a weathertight external seal, an internal airtight seal, and thermal and acoustic insulation. -
Illbruck ME501 Duo Window Membrane HD
REF:
REF:
Description
ME501 is a high strength, tear resistant membrane made from polyethylene copolymer film with non-woven fabric. It provides a high performance seal to the perimeter joint between the window/curtain wall and the construction reveal.What the experts have to say
Certificate N° 12/4891Illbruck ME501Illbruck ME501 is BBA Accredited. The product meets the recommendations of the RAL Quality Assurance Association for windows and doors. It has also been successfully tested by MPA Hannover to EN1026 (airtightness) & EN1027 (weathertightness).
