Showing all 11 results
-
MAPEI Eco Prim T Plus
REF:
REF:
Description
Eco Prim T Plus Multi-purpose acrylic primer that improves the adhesion of interior levelling compounds on all types of absorbent and non-absorbent substrates. The primer has excellent bonding, flexibility, water and age resistant properties and is easily applied by brush or roller. -
MAPEI ECO TACK TX+
REF:
REF:
Description
ECO TACK TX+ Carpet tile tackifier for the non-permanent installation of carpet tiles. Allows the replacement of carpet tiles as and when required. Low emissions of VOC. Also suitable for the installation of loose lay LVT’s. -
MAPEI Latexplan No Ammonia
REF:
REF:
Description
Latexplan No Ammonia Latexplan No Ammonia is a fast setting two-component levelling and smoothing compound for differences in thickness of 3 to 10mm. Suitable for use over old adhesive residues (including bitumen) it can also be applied to plywood and ceramic tile without the need for priming. Protein free with no ammonia. Suitable for castor wheels and heated screeds. Moisture tolerant. -
MAPEI Latexplan Trade
REF:
REF:
Description
Latexplan Trade Two-component, levelling and smoothing compound for differences in thickness of 3 to 10mm on new or existing floors. Suitable to receive all types of floor covering in commercial and domestic settings. High compressive strength (26N/mm²) and low odour. Suitable for castor wheels and heated screeds. Moisture tolerant. -
MAPEI Mapeproof One Coat Epoxy DPM
REF:
REF:
Description
Mapeproof One Coat Epoxy DPM Two-component, single coat, black, epoxy surface applied DPM. Applied to cement-based substrates for controlling residual, static and construction moisture levels of above 75% (BS8203) and below 97% R.H. on subfloors with an effective structural damp proof membrane prior to the installation of resilient, textile and wood floor coverings. Suitable for use with underfloor heating except where wood finishes are to be installed. Trowel and roller applied. -
MAPEI Mapeproof Primer
REF:
REF:
Description
Mapeproof Primer Water Based DPM One-component, two-coat applied, rapid drying PVDC based dispersion primer for suppressing residual moisture up to 4.5 CM-% (95% R.H.). Suitable for use over heated screeds up to a maximum of 85% R.H. Roller applied. -
MAPEI Planiprep Fix
REF:
REF:
Description
Planiprep Fix Ultra-fast drying, fine grained, thixotropic, cementitious skimcoat compound for the repair and smoothing of interior substrates, including floors and steps. Suitable for application from 0-4mm prior to the laying of resilient and textile floor coverings. -
MAPEI PRIMER G
REF:
REF:
Description
PRIMER G Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). -
MAPEI Ultrabond Eco 380
REF:
REF:
Description
Ultrabond Eco 380 A solvent-free, non flammable vinyl/PVC adhesive dispersed in water, with strong initial bond and long open time. Use for bonding PVC / vinyl, homogenous and heterogenous sheet or tile, semi-flexible vinyl tiles on to all kinds of internal, absorbent and moisture stable substrates normally used in building. Particularly suitable for use in environments subject to intense traffic and wheelchair use. -
MAPEI Ultrabond Eco VS90 Plus
REF:
REF:
Description
Ultrabond Eco VS90 Plus Hard set, highly shear resistant, wet-bed dispersion adhesive, specific for PVC and rubber floorings and wall coverings on absorbent substrates. Also suitable as universal adhesive for all common resilient and textile floor covering types. For use on floors and walls in interior applications. Suitable on level and absorbent surfaces; underfloor heating systems. Stresses from chair castors according to EN 12529. -
MAPEI Ultraplan Renovation Screed 3240
REF:
REF:
Description
Ultraplan Renovation Screed 3240 Fibre-reinforced self-levelling compound designed for the renovation/refurbishment of new and existing floor substrates for differences of 3 to 40mm. For use in both commercial and domestic situations. Suitable for use over many common substrates and flexible enough for use over old and new timber flooring, floorboards, chipboard panels and plywood to receive most types of floor covering. Suitable for underfloor heating systems and castor wheels. Can be hand or pump applied.
