Showing all 7 results
Kingspan Thermaroof TR24
REF:
REF:
Description
Kingspan Thermaroof TR24 is a rigid thermoset insulation compatible with the majority of torch applied waterproofing systems.What the experts have to say
Green GuideRatingThermaroof TR24 produced at Kingspan Insulation’s Pembridge (Herefordshire) and Selby (North Yorkshire) manufacturing facilities is certified to BES 6001 ‘Good’.Kingspan Thermaroof TR26
REF:REF:Description
Kingspan Thermaroof TR27 is a flat-roof insulation board compatible with most mechanically-fixed, single-ply waterproofing systems and most green roof systems.What the experts have to say
Green GuideRatingThermaroof TR26 produced at Kingspan Insulation’s Castleblayney (Co. Monaghan) manufacturing facility is manufactured under a management system certified to ISO 14001: 2015.Kingspan Thermaroof TR27
REF:REF:Description
Kingspan Thermaroof TR27 is a flat-roof insulation for use on roofs waterproofed with fully-adhered, single-ply, partially-bonded, built-up felt, mastic asphalt or cold liquid applied waterproofing. Also compatible with most green roof systems.What the experts have to say
Green GuideRatingThermaroof TR27 produced at Kingspan Insulation’s Castleblayney (Co. Monaghan) manufacturing facility is manufactured under a management system certified to ISO 14001: 2015.Unilin Insulation FR/ALU
REF:REF:
Description
Mechanically Fixed Single Ply Waterproofing Systems FR/ALU is a Polyisocyanurate flat roof insulation with vapour-tight composite foil facings suitable for use with single ply membranes. FR/ALU is part of Unilin’s range of flat roof boards providing total solutions for flat roof projects.What the experts have to say
Laying(Metal/Timber Deck)Unilin FR/ALU foil faced boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the corrugations and all board joints must be fully supported by the deck. The FR/ALU insulation boards are generally secured by approved mechanical fixings.Unilin Insulation FR/BGM
REF:REF:Description
Partially Bonded, Torched-on, Built-up Bituminous Felt Systems Flat Roof BGM is faced with a polypropylene fleece finished bitumen/glass fibre working surface and a mineral glass facing to the underside. As a key component of roof insulation, Flat Roof BGM is part of Unilin’s range of flat roof boards providing total solutions for flat roof projects.What the experts have to say
FirePerformanceBuilt-up roofs using Unilin FR/BGM as part of a 3-layer system, with mineral chippings on the cap sheet will attain an FAA rating when tested to BS 476, Part 3: 2004 external fire exposure roof test.Unilin Insulation FR/MG
REF:REF:Description
Single Ply Fully Adhered Partially Bonded Built-Up Felt Systems Flat Roof MG is a high performance Polyisocyanurate with mineral coated glass facers suitable for use below single ply fully adhered or partially bonded built up felt systems.What the experts have to say
Fully AdheredSystemsUnilin Insulation FR/MG is suitable for use with most fully adhered single–ply waterproofing membranes. Board joints and abutments should be taped subject to the approved adhesive system being used. A fleeced backed membrane might be required with the system being used, check with the system manufacturer.XTRA-Stik Insulation Adhesive
REF:REF:
Description
Quick-drying Insulation Adhesive XTRA-Stik Moisture-Curing Polyurethane Canister Adhesive allows your contractor to apply insulation adhesive precisely and quickly. It is a pressurised canister system, which is suitable for the professional bonding of a wide range of insulation boards to VCL or straight to deck. XTRA-Stik minimise time onsite; it is 5x faster to apply than a standard hand-poured bead-applied MCPU adhesive due to the pressurised canister system. XTRA-Stik covers up to one square metre of insulation board in as little as 2-3 seconds, whereas it...
