Showing 337–352 of 611 results
-
Xtratherm FR MG
REF:
REF:
Description
Xtratherm FR/MG is a high performance insulation board suitable for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.What the experts have to say
Fully AdheredSystemsXtratherm FR/MG is suitable for use with most fully adhered single–ply waterproofing membranes. Board joints and abutments should be taped subject to the approved adhesive system being used. A fleeced backed membrane might be required with the system being used, check with the system manufacturer. -
Bond It All Weather Roofing Compound
REF:
REF:
Description
A general purpose, waterproof coating for all common roofing surfaces including mastic asphalt, roofing felt, corrugated iron, fibre/cement, slates, lead, copper, tin and zinc. Excellent adhesion to damp surfaces, resistance to extremes of temperature and does not crack in the cold or flow in the sun. Recommended where the threat of frost or rain precludes the use of an emulsion. Can be over coated with a suitable decorative solar reflective paint to prolong the life of the coating. Preparation All surfaces must be structurally sound,... -
Bond It Brick Patio Cleaner
REF:
REF:
Description
A powerful acid based cleaner that will remove cement and mortar splashes, grime, oil, grease and other difficult-to-remove stains, from brickwork, patios, garages, paving, concrete floors and warehouses. Application Gloves, overalls, boots and goggles should be worn at all times during application. Protect metal surfaces and paint-work before application with polythene sheets and tape. Remove excess dirt, mortar, etc. with a stiff yard brush. If cleaning down brickwork saturate area with water to prevent damage to mortar. Before commencing a full clean down, test on... -
Bond It Fill And Fix Expanding Foam Filler
REF:
REF:
Description
Expanding foam that is based on a moisture curing polyurethane pre-polymer. Quick, economic and easy to apply. Improves draught and heat insulation, fills irregular gaps, fixes framework and deadens sound. Can be cut, sawn, plastered and sealed over once cured. Available in 500ml and 750ml aerosol cans or 750ml gun grade canister which can be used with a standard gun foam applicator. -
Bond It Flexible Wide Joint Grout
REF:
REF:
Description
A cement-based, joint filling compound for tile joints from 3mm up to 20mm wide around all types of ceramic floor and wall tiles. A specially formulated (highly polymer modified) grouting compound for applications where tiles have been fixed with both a standard or flexible adhesive, and where some slight degree of surface movement or vibration is anticipated. Provides a flow-able, readily compactable, grouting slurry that produces stable floor tile joints, without shrinking or cracking. Flexible Wide Joint Grout will set to a hard, durable, waterproof... -
Bond It Levelmaster Latex Liquid
REF:
REF:
Description
A polymeric, casein-free, liquid latex for use with LevelMaster Self-Levelling Compound Will improve adhesion and wearing properties when added to Levelling Compounds. Suitable for use on concrete, well braced timber, mastic asphalt and quarry tiles. Will improve adhesion, wearing properties and increase flexibility when added to levelling compounds. Should be used to improve “water-mix” levelling compounds especially when used on substrates subject to movement i.e. timber or metal decks. It can also allow levelling compounds to be used as final finish in lightly trafficked areas.... -
Bond It Non-Smear Glass Cleaner
REF:
REF:
Description
A fast-acting, streak-free glass cleaner for the safe and effective removal of all common contaminates such as traffic fumes, nicotine, soot and finger marks. -
Bond It Saves Nails Solvent Free
REF:
REF:
Description
Offering less impact on the environment, this solvent-free formula offers instant grab and a tough permanent bond on virtually any porous or non-porous surface. A low odour, water clean-up construction adhesive which cures to form a high strength bond. Extremely low VOC content. Contains no harmful raw materials, making it safer for the environment, safe for the user and safe on substrates. Recommended for internal use only. -
Breeze Artificial Landscape Grass 30 mm
REF:
REF:
Description
So you’ve been thinking about artificial grass, but want to feel confident that it’s going to look and feel as realistic as possible? Then we’d like to introduce you to Laydex Breeze Grass. The two tone straight green yarn is combined with a texturised beige yarn which is designed to mimic the colours, shape, structure and behaviour of natural grass, then produced with care to result in a lawn that even nature would be jealous of.What the experts have to say
EasyMaintenanceIt is important to regularly remove leaves, twigs and other organic material, either with a leaf blower / vacuum cleaner, a stiff brush or a rake. Larger objects such as branches must be removed manually. If moss appears in areas where there is not enough sunlight, an anti-moss treatment could be necessary, preferably applied during the spring and autumn. Use a bio-degradable product for this; never use acidic liquids or bleach as these chemicals could damage the fibres if applied in too high a concentration. -
Fortessa Achilles
REF:
REF:
Description
Transform Your Home With An Elegant Fortessa Achilles Door Handle Achilles is a distinctive and stylish door lever on rose that underwent specialist lacquer treatments to provide a high resistance to shocks and abrasions and to help maintain its natural shine long into the future. All Fortessa products undergo thorough testing at all stages of manufacture, and performance of all working parts is rigorously tested. Round rose Meets DIN EN 1906 Interior Residential classification standards Manufacturer’s Warranty: 10 yearsWhat the experts have to say
Fortessa AchillesDoor Lever on RoseFortessa Door Handles are covered by a 10 Year Guarantee on mechanical parts. Our levers have been tested to pass DIN EN 1906 European Quality Standards, and have been tested for frequency of use. Essentially each door handle is guaranteed for 100,000 revolutions. -
KEMPEROL® V210M
REF:
REF:
Description
Waterproof in a single process application Kemperol V210M adapts to a structure like a second skin and offers long-term protection down to the last detail – roof parapets, sky lights, ventilation pipes, metal supports and lightning protection rods are integrated in the surface waterproofing without any seams or joints. In addition to flat roofs, the system is widely used in other difficult waterproofing applications – on planters, gutters and flashings.What the experts have to say
KEMPEROL® V210MBBA CertifiedHighly durable and long lasting, Kemperol V210M is certified by the British Board of Agrément (BBA). -
Nullifire FF197 PU Foam
REF:
REF:
Description
FF197 is a modified, single component, fire rated polyurethane foam. FF197 is used to seal linear gaps throughout the fire rated areas of a building.What the experts have to say
PreparationFF197 PU FoamAlways carry out a test to confirm compatibility prior to use. Protect floor coverings with paper or a plastic film. The surfaces must be dry, solid, stable. Remove all loose particles, dust and grease. A speedier cure can be attained by moistening the substrates if needed. -
Nullifire SC801 Water-Based Intumescent Basecoat
REF:
REF:
Description
SC801-120 Intumescent Basecoat is a waterborne, white, thin film intumescent coating for the protection of internal structural steelwork. SC801-120 can provide up to 120 minutes fire resistance.What the experts have to say
Nullifire SC801ApplicationAirless spray equipment is recommended for application. SC801 may be applied up to a maximum wet film thickness of 1.2 mm in a single spray coat comprising of several quick passes. Brush/Roller application is also achievable. See datasheet in the downloads section for more details. -
Pluvitec Plura R Re-roof (black & brilliant black)
REF:
REF:
Description
Mineral Finished Composite Bituminous Waterproofing Membrane Quite simply the best roofing felt on the market! Plura R Re-roof is a composite APP bituminous waterproofing membrane predominantly used on refurbishment projects. The upper face provides high heat resistance and cold flexibility, while the lower face gives unrivalled adhesion and workability with a wide variety types of substrates. Fully compatible with all PLUVITEC membranes, both APP& SBS. Colours: Black, brilliant black.What the experts have to say
PluvitecPlura R“The best felt on the market. It’s workability is unrivalled. Try it and you’ll never want to work with another felt again!”
-
RADEX 3000 Non-Reinforced Radon Membrane
REF:
REF:Description
Protection of Buildings from the Ingress of Radon Gas RADEX 3000 Radon Membrane is manufactured from an enhanced blend of polymer films that is suitable for use in the protection of buildings from the ingress of radon gas. Radex 3000 Radon Membrane also acts as a damp proof membrane, but is not intended for use where there is the risk of hydrostatic pressure. It is approved for use in Ireland. Radex 3000 Radon Membrane can be used in most common floor constructions. It is installed... -
Renolit Alkorplan A
REF:
REF:
Description
Renolit Alkorplan is a thermoplastic PVC-P roofing membrane. Alkorplan A is a calendered and laminated fleece-backed membrane of flexible PVC for use in the Alkor Adhered system. Adhering offers benefits of non-penetration to the deck surface and in situations where mechanical fixing would be more difficult. Ideal over swimming pools and accommodation.What the experts have to say
RenolitAlkorplan ASuitable for both new build and refurbishment projects on flat, pitched, curved and vertical roofs.
