Bond It Bitubond Primer

Bond It Bitubond Primer

Description

A Highly Penetrative, General Purpose Bitumen Primer

A quality grade, highly penetrative, bituminous solution for priming surfaces prior to the application of bituminous materials and flashing tapes. Heavy duty formula making it suitable to prime concrete roofs and floors, cementitious screeds/renders, bitumen felt, weathered bitumen, mastic asphalt, corrugated iron and steel.

Make an enquiry


    What the experts have to say

    Bitumen Primer
    Application Tip
    Apply by brush or spray. Using a brush, scrub the primer into the surface. Ensure that only a thin coat is applied and that there is no pooling. Alternatively, spray thinly and evenly. Priming should extend at least 75mm beyond the area to be waterproofed. Leave to dry for 2- 3 hours before continuing with further work. With fibre cement or dry rag based bituminous felts, apply generously to saturate the surface.
    Type of solvent:
    White Spirit
    Approximate Flashpoint:
    40°C
    Approximate Specific Gravity:
    0.90
    Approximate Coverage:
    4-6 m2 per 1 litre (dependent on substrate porosity)
    Application Temperature Limits:
    Normally 5°C to 35°C and free from ice/ water
    Sizes:
    1 Litre, 2.5 Litre, 5 Litre, 25 Litre
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products