Excellent adhesion
Application in damp weather
Instant protection
Reinforced membrane
Superb solar reflectivity
One coat application
Seamless
Unaffected by temperature
Fully flexible
Economical
Bond It SealAcryl
Bond It SealAcryl
Description
A one component, UV stable, solvent-based, mutli-purpose roof coating membrane. Designed to prevent the ingress of water whilst allowing any trapped moisture to escape and evaporate naturally. Manufactured with fibre reinforcement pre-dispersed in the can for ease of application.
What the experts have to say
SEALACRYL
Application Tip
Do not thin.
Apply SEALACRYL using either a brush or roller.
Treat all details first, in areas where excessive
movement may occur additional reinforcement
can be incorporated into the coating.
SEALACRYL can be applied in one coat, but
experience has shown that a two coat application
ensures a greater uniformity of coating thickness.
Type of solvent:
White Spirit/ pma
Approximate Flashpoint:
40°C
Approximate Specific Gravity:
1.0
Approximate Coverage:
Average coverage is approximately 1-2kg per square metre.
Service Temperature Limits:
-10°C to + 85°C depending on operating conditions
Application Temperature Limits:
Normally 5°C to 40°C
Chemical Resistance:
Resistant to: most salt solutions, dilute acids and alkalis.
Not resistant to: oils, solvents, some detergent solutions and some glass cleaning compounds
Volume solids:
60%
Sizes:
1kg, 5kg
Full Information:
Check out the full datasheet available in the Downloads section!
