Xtratherm FR ALU
Xtratherm FR ALU
Description
Insulation for Mechanically Fixed Single Ply Waterproofing Systems
Xtratherm FR/ALU is a high performance flat roof insulation board with vapour-tight aluminium foil facings suitable for use with single ply membranes. FR/ALU is part of the comprehensive range of Xtratherm’s high performance flat roof boards providing total solutions for flat roof projects.
What the experts have to say
Laying
(Metal/Timber Deck)
Xtratherm FR/ALU foil faced boards should be laid over the vapour
control layer in a break bonded pattern. The long edges of the boards
should be laid at right angles to the corrugations and all board joints
must be fully supported by the deck. The FR/ALU insulation boards
are generally secured by approved mechanical fixings.
Compatible with most green roof systems
FM Approval
Manufactured with zero ODP blowing agent
Non-deleterious material
Aids fast track building programmes
High Compressive Strength
High Thermal Performance Rigid Insulation
Easy to Install
Suitable for new build and refurbishment
Compatible with most mechanical fixed single ply roofing systems
Closed cell structure – moisture resistant
Length:
2400mm
Width:
1200
Density (Foam Core):
32 kg/m3
Compressive Strength:
>150kPa @ 10% Compression
Water Vapour Resistivity:
>100MNs/gm
BBA Certified Thermal conductivity:
0.022W/mK
Facings:
Low Emissivity Foil Facings
Board size:
2400mm x 1200mm
Board Profile:
Square Edge
Full Information:
Check out the full datasheet available in the Downloads section!
