Tremco SX200 Self Levelling Compound
Tremco SX200 Self Levelling Compound
Description
SX200 is a fast drying, self levelling, and pump applied underlayment, for levelling of concrete floors before the installation of floor coverings. Provides good resistance to impact, point loading and abrasion. Ideally suited to floors in office buildings, shops, public buildings, schools, hospitals, airports and prisons.
Environmentally friendly product: OPC free and 38% recycled content
Protein free - will not harbor bacteria
Fast setting - walk on after 2 - 4 hours under suitable conditions
Up to 30% reduction in environmental impact and global warming potential compared to traditional cementitious screeds
Rapid installation – 2000 m² per day for 7 mm thickness, under suitable conditions
Temperature Resistance:
+50°C max
Abrasion Resistance:
(Taber H22 Wheel/1 kg) 1.7g loss/1000 cycles
Ultimate Compressive Strength:
BS EN 196: 35 N/mm²
Shrinkage:
< 0.06%
Thickness:
3 – 30 mm
Mix Ratio per 25 kg:
4.5 – 5 litres water
Coverage:
An average thickness of 3 mm will provide a typical coverage rate of 5 m² per mix
Cure Time (at 20°C) 10 mm thickness:
at 10°C: Walk On 4 - 8 hours, Full traffic 2 days
Full Information:
Check out the full datasheet available in the Downloads section!
