DAMTEC® Standard

DAMTEC® Standard


Universal Impact Sound Insulation Under Floor Covering

DAMTEC® Standard is the universal product for impact sound insulation. This underlay can be used under parquet, laminate, carpeting and ceramic tiles as well as under linoleum and PVC flooring. It reduces unwanted noise – within your own four walls and those of your neighbours as well.

DAMTEC® Standard is available in a wide range of thicknesses and independently tested to evidence compliance with the Irish Building regulations. DAMTEC®  Standard and DAMSTIK adhesive allow for a fully compatible adhered system.

Make an enquiry

    Request a sample

      • Brilliant noise insulation with a low panel thickness

      • Highest resiliency even after years of use (does not compress and reduce sound absorption)

      • Fast and easy installation. Eliminates hollow clicking sounds and reverberations (floor to ceiling noise) under hard flooring

      • Outstanding compressive strength and load-bearing performance

      • Very low emission

      • Very environment-friendly, recycled rubber can be recycled again

      • Fully compatible adhesive for fully adhered systems

      • Good heat transmission, ideal for use with underfloor heating/cooling systems

      • Cushioning effect increases underfoot comfort in combination with carpeting

      • Permanently elastic

      Approx. 700 kg/m³
      Tensile strength:
      Approx. 0.6 N/mm²
      Elongation at break:
      Approx. 20%
      Roll width:
      1,000 mm
      2, 3, 4, 4.5, 5 and 6 mm
      Roll length:
      On request
      29 dB with carpet
      20 dB under 8 mm laminate flooring
      19 dB under 13 mm parquetry
      18 dB under 16 mm solid parquetry
      18 dB under 9mm tiles
      Full Information:
      Check out the full datasheet available in the Downloads section!

      Related Products