DAMTEC® Resistant Cork

DAMTEC® Resistant Cork


Fire Rated Impact Sound Insulation Under Floor Covering

Whenever the acoustic underlay must comply with high requirements of the structural fire protection (B1, Cfl-s1), then DAMTEC® Resistant Cork is the ideal acoustic underlay, suitable for residential and commercial buildings.

With special selection of raw material DAMTEC® Resistant Cork is of low flammability. It’s suitable for parquetry and laminated floor as well as for textile floors. DAMTEC® Resistant Cork G is grinded on one side and can be used for PVC and Linoleum flooring.

Make an enquiry

    • Brilliant noise insulation with a low panel thickness

    • Outstanding compressive strength and load-bearing performance

    • Fast and easy installation. Eliminates hollow clicking sounds and reverberations (floor to ceiling noise) under hard flooring

    • Highest resiliency even after years of use (does not compress and reduce sound absorption)

    • Permanently elastic

    • Good heat transmission, ideal for use with underfloor heating/cooling systems

    • Cushioning effect increases underfoot comfort in combination with carpeting

    • Very environment-friendly, recycled rubber can be recycled again

    • Very low emission

    Approx. 600 kg/m³
    Length and width ± 1.5%, Thickness ± 0.3 mm
    Tensile strength:
    Approx. 0.6 N/mm²
    Elongation at break:
    Approx. 10%
    Roll width:
    1,250 mm
    2, 3, 4, 5, 6 mm
    Roll length:
    On request
    17 dB under 2mm PVC flooring
    25 dB under textile flooring
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products