Bond It Steri-Grout Hygienic Floor & Wall Tile Grout
Bond It Steri-Grout Hygienic Floor & Wall Tile Grout
Description
A specially formulated, polymer modified cement based floor and wall tile grout. Recommended for sanitary installations ie. kitchens, bathrooms, toilets and shower rooms. Containing a strong fungicide it will also inhibit black spot mould growth.
Conforms to EN 13888: CG2W.
Uses
STERI-GROUT is suitable for use in areas of limited movement/vibration so ideal for use over timber plyboards and heated sub-floors. Recommended for sanitary installations ie. kitchens, bathrooms, toilets and shower rooms. This grout has excellent adhesion charachteristics to porcelain and fully vitrified tiles, has low permeability and reduced dirt pick up. Containing a strong fungicide it will also inhibit black spot mould growth.
Joint Width:
2-20 mm
Compressive Strength:
> 15 MPa
Flexural Strength:
>2.5 MPa
Shrinkage:
< 3 mm/m
Setting Time:
12- 24 hours (dependent on conditions)
pH @ 20°C:
12-13
Water Absorption:
@ 30 min < 2 g
@ 240 min < 5 g
Abrasion Resistance:
< 2000 mmᵌ
Full Information:
Check out the full datasheet available in the Downloads section!
