Tyvek FlexWrap™NF
Tyvek FlexWrap™NF
![Tyvek FlexWrap™NF](https://laydex.ie/wp-content/uploads/2017/04/DuPont-Tyvek-logo-2021.png)
Description
Tyvek® FlexWrap™ self adhered flashing does not require mechanical fasteners, even in flexed corner areas around building openings. This allows it to provide easy, one-step insulation for hard-to-seal corners around windows and doors.
FlexWrap™ is designed to help protect vulnerable corners against air and water intrusion, as part of a complete DuPont Building Envelope Solution. It’s effective across a range of window and door designs and a wide range of typical wall substrates, including OSB, plywood, gypsum, concrete masonry unit (CMU) and other non-nailable sheathing materials.
![](https://laydex.ie/wp-content/uploads/2016/07/icon-6-1.png)
Helps seal the building envelope when used with DuPont Weatherization Systems products
Meets the AAMA 711-13 material standard at the highest classification levels: Class A (no primer) and Level 3 Thermal Exposure (80°C / 176°F for 7 days)
Can be installed at external temperatures as low as -4°C (25°F) as long as the surface is clean and free from frost and ice
![](https://laydex.ie/wp-content/uploads/2016/07/icon-4-1.png)
Meets and Exceeds ASTM E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference: no leakage at 300 Pa (equivalent to 50 mph windload), even after thermal aging (0-120°F)
Does not contain asphaltic / bitumen adhesive materials which many window manufacturers prohibit due to adverse material reactions, such as black staining, oozing, and deformation over time, particularly with vinyl flanges.