ALUTRIX® Vapour Barrier Membranes – Cold-applied, Self-adhesive

ALUTRIX High Performance Self-Adhesive, Cold Applied Aluminium Vapour Barrier

Self-adhesive
Cold applied
Vapour proof
Very high tear resistance
Withstand foot trafficking on profiled metal decking, without puncturing
Create an airtight seal, complying with Part L of the energy conservation regulations
Highly resistant to ageing
Chemically stable
ALUTRIX® 600 and ALUTRIX® FR can be bonded with complete confidence at ambient temperatures of + 5 °C
ALUTRIX® 600 achieves a Class 0 fire rating to BS 476 Part 6
Reduced fire load – ALUTRIX® FR has a calorific value of ≤10,500 kJ/m2 and complies fully with fire protection requirements for reduced fire load vapour barriers, according to DIN 18234 and national regulations.
ALUTRIX® FR complies fully with FM Approval Standard Class No. 4470

SUBSTRATE TYPE		ALUTRIX® 600	ALUTRIX® FR	FG 35	FG 35 Coverage/ Consumption
Installation information for surface adhesion(*)	Metal Decking:
	Galvanized or uncoated	Yes	Yes	Yes	50%/100g/m²
	Plastic-coated	Yes	Yes	No	—
	Plywood/OSB (timber-based products) (**)	Yes	Yes	Yes	50%/100g/m²
	Concrete	Yes (***)	No	Yes	50%/100g/m²
	Bituminous Substrates	Yes	Yes	Yes	50%/100g/m²
() For mechanically fixed or ballasted roofing systems, priming the roof surface is not usually required. () On panels more than 500mm wide while where movement may be anticipated, install non-adhesive tape strips over the board joints. (**) Only on dry, smooth and clean concrete materials. Mechanical damaged or perforation by exposed aggregated must be avoided.