|   

Xtratherm FR ALU

Description

Insulation for Mechanically Fixed Single Ply Waterproofing Systems

Xtratherm FR/ALU is a high performance flat roof insulation board with vapour-tight aluminium foil facings suitable for use with single ply membranes. FR/ALU is part of the comprehensive range of Xtratherm’s high performance flat roof boards providing total solutions for flat roof projects.

Make an enquiry



Request a sample


What the experts have to say

Laying
(Metal/Timber Deck)
Xtratherm FR/ALU foil faced boards should be laid over the vapour control layer in a break bonded pattern. The long edges of the boards should be laid at right angles to the corrugations and all board joints must be fully supported by the deck. The FR/ALU insulation boards are generally secured by approved mechanical fixings.
Categories: , ,
  • Compatible with most green roof systems

  • FM Approval

  • Manufactured with zero ODP blowing agent

  • Non-deleterious material

  • Aids fast track building programmes

  • High Compressive Strength

  • High Thermal Performance Rigid Insulation

  • Easy to Install

  • Suitable for new build and refurbishment

  • Compatible with most mechanical fixed single ply roofing systems

  • Closed cell structure – moisture resistant

Length:
2400mm
Width:
1200
Density (Foam Core):
32 kg/m3
Compressive Strength:
>150kPa @ 10% Compression
Water Vapour Resistivity:
>100MNs/gm
BBA Certified Thermal conductivity:
0.022W/mK
Facings:
Low Emissivity Foil Facings
Board size:
2400mm x 1200mm
Board Profile:
Square Edge
Full Information:
Check out the full datasheet available in the Downloads section!

Xtratherm FR ALU Project

HOWTH YACHT CLUB

hyc hyc-750x3606 hyc-750x3605

Read More >>



Related Products