Mechanically fixed EPDM waterproofing membrane

RESITRIX® MB is a hot air-weldable waterproofing membrane with a synthetic rubber (EPDM) base. RESITRIX® MB is particularly suited to mechanical fixation and loose laying with ballasting.

RESITRIX® MB is also suitable for loose laying in the building waterproofing sector.

RESITRIX® MB has a certified service life of more than 50 years and also named the only product of its kind for joining seams. Simple and safe installation without any need for naked flames. Sustainable waterproofing product (EPD-certified and DGNB-compliant).

Make an enquiry

    Request a sample

      • Practically free from shrinkage throughout its entire service life

      • Permanently elastic and flexible at low temperatures of down to -40°C

      • Resistant to micro-organisms and free from plasticisers and chlorine

      • 100% bitumen-resistant

      • Ultimate elongation of more than 500%

      • Environmentally friendly and recyclable

      • Simple and safe Installation without any need for naked flames

      • 100% leak-tight welded seam – simple visual inspection

      • The entire underside of the EPDM membrane can be welded

      • Non-slip surface, even when wet

      • No additional measures required for the T-joint area

      • Can be welded with hot air down to -10°C

      Total membrane thickness:
      Surface weight:
      Approx. 3.5 kg/m²
      Standard roll size:
      10m x 1m
      CE certification:
      DIN EN 13956 and DIN EN 13967
      Membrane designation:
      DIN SPEC 20000-201: DE/E1 EPDM-BV-V-GG-1.6-PBS
      Full Information:
      Check out the full datasheet available in the Downloads section!

      Related Products