| PREVNEXT
Xtratherm FR MG
Xtratherm FR MG
![Xtratherm FR MG](https://laydex.ie/wp-content/uploads/2016/08/Xtratherm-logo-redonwhite.W.jpg)
Description
Xtratherm FR/MG is a high performance insulation board suitable for use below single ply fully adhered roof membranes, single ply waterproofing systems and partially bonded built-up felt.
What the experts have to say
![](https://laydex.ie/wp-content/uploads/2016/08/experts-mg.jpg)
Fully Adhered
Systems
Xtratherm FR/MG is suitable for use with most fully adhered
single–ply waterproofing membranes. Board joints and abutments
should be taped subject to the approved adhesive system being
used. A fleeced backed membrane might be required with the
system being used, check with the system manufacturer.
![](https://laydex.ie/wp-content/uploads/2016/07/fact-3-e1484147036444.png)
Compatible with most mechanical fixed single ply roofing systems
Compatible with most green roof systems
Closed cell structure – moisture resistant
FM Approval
Easy to Install
![](https://laydex.ie/wp-content/uploads/2016/07/service4.png)
High Thermal Performance Rigid Insulation
Suitable for new build and refurbishment
Non-deleterious material
Manufactured with zero ODP blowing agent
High Compressive Strength
Density (Foam Core):
32kg/m3
Compressive Strength:
>150kPa@10% Compression
Water Vapour Resistivity:
>100MNs/gm
BBA Certified Thermal conductivity range:
0.024 – 0.026 W/mK
Facings:
Mineral Glass Coated Facings
Core:
Rigid PIR Foam
Board size:
1200mm x 600mm
1200mm x 1200mm
Board Profile:
Square Edge
Full Information:
Check out the full datasheet available in the Downloads section!