Tremco CS980 Pavseel Concrete & Paving Sealer
Tremco CS980 Pavseel Concrete & Paving Sealer
Description
Concrete Sealer CS980 penetrates deep porous concrete and hardens to provide a dustproofed surface
It can also assist with stabilising jointing sand, or to protect the integrity of block paving.
CS980 has a variety of uses:
Concrete / screed: ideal for most industrial floors including warehouses, machine shops, etc.
Block paving: footpaths, pedestrian precincts, domestic driveways, office car parks, retail parks and highways.
Stone / granite / basalt: may be used to impregnate the surface and reduce the porosity.
Solvent free - no strong odor
Long performance life and stable under normal UV radiation
Resistant to petrol, oil and diesel spillages
Reduces staining and makes the surface much easier to clean
Inhibits water/fuel penetration and inhibits weed growth
Storage:
Store in dry shaded conditions between 5°C and +25°C. Do not allow to freeze
Shelf Life:
12 months when stored as recommended in original unopened containers
CURE TIME:
Concrete/Screed:
Will accept foot and light traffic after 12 hours, and will be fully cured after 24 hours. Do not wash the treated surface for 48 hours. These curing periods assume a temperature of 15°C to 30°C and good ventilation.
Block Paving:
Surfaces treated with CS980 can normally be re-opened to foot traffic within 12 - 24 hours
COVERAGE:
Concrete/Screed:
150 - 200 m² per 25 litres
Block Paving:
Up to 50 m² per 25 litres (depending on the porosity of the pavers, block size and joint width)
Full Information:
Check out the full datasheet available in the Downloads section!
