Tremco SX400 Cementitious Repair Mortar
Tremco SX400 Cementitious Repair Mortar
Description
SX400 is a general purpose high strength fast setting mortar.
SX400 is designed for patch repairs in concrete and sand/cement subfloors, in small areas prior to the application of TREMCO surface membranes. It has good resistance to forklift traffic and may also be used for patch repairing floors in industrial premises.
Sets in only 15 minutes for overlaying
Rapid strength gain
Can be mixed with clean aggregate
Bonds to porous substrates without a primer
Moisture tolerant for use under surface damp proof membranes
Composition:
A blend of special cements, graded fillers and modified polymers
Open Time/Workability (at +20°C):
5 - 12 minutes
Pot Life (at 20°C):
20 minutes
Density:
2.220 kg/m³
Cure Time (at 20°C):
Foot Traffic: 90 minutes
Compressive Strength:
1 hour:
12 N/mm²
2 hours:
21 N/mm²
24 hours:
28 N/mm²
28 days:
>50 N/mm²
Tensile Strength:
1 day:
1.82 N/mm²
7 days:
2.46 N/mm²
28 days:
3.51 N/mm²
Full Information:
Check out the full datasheet available in the Downloads section!
