| PREVNEXT
Tremco SF165 Water Resistant Contact Adhesive
Tremco SF165 Water Resistant Contact Adhesive
![Tremco SF165 Water Resistant Contact Adhesive](https://laydex.ie/wp-content/uploads/2016/04/tremco.jpg)
Description
SF165 is a cross-linking contact adhesive.
SF165 is used for the permanent bonding of: smooth backed rubber floor coverings and PVC nosing covings for service in dry and wet conditions, both indoors and outdoors.
![](https://laydex.ie/wp-content/uploads/2016/07/quality.png)
The bonded floor can be subjected to foot traffic immediately after being placed in position, unlike most other water-resistant adhesives
Ideal bonding agent for some exposed public areas (staircases, entrance halls and public walkways)
![](https://laydex.ie/wp-content/uploads/2016/07/support.png)
Excellent resistance to plasticiser migration
Better heat resistance than normal contact adhesives
Highly resistant to surface water and can be used outdoors
Specific Gravity:
0.85
Flash Point:
Below -18°C
Application Temperature Range:
+4°C to +30°C
Service Temperature:
-20°C to +85°C
Coverage:
2.5 - 3.0 m² of bonded area per litre
Dry Tack Time:
Up to 25 minutes
Drying Time:
5 - 15 minutes
Final Bond Strength:
36 to 48 hours
Storage:
Store in dry conditions between +5°C and +25°C
Shelf Life:
9 months when stored as recommended in original unopened containers
Full Information:
Check out the full datasheet available in the Downloads section!