DuPont™ AirGuard® Control

DuPont™ AirGuard® Control


DuPont™ AirGuard® Control is designed to reduce uncontrolled air leakage and minimise convective heat loss in roofs, walls and floors.

A continuous layer of DuPont™ AirGuard® Control reduces air leakage by providing an effective vapour control barrier to control air movement and moisture infiltration around the habitable space of the building.

Make an enquiry

    What the experts have to say

    Wall Connection:
    First ceiling then wall membrane
    Place the membrane against the ceiling, allowing a 100mm lap onto/down the adjacent walls. Remove the release liner from the tape and press the membrane firmly into place. Fold the membrane in the corner, do not cut off the fold.
    • Reduced convective heat losses

    • Reduced risk of condensation in the insulation

    • Transparency for easier installation of insulation

    • Reaction to Fire: Class E

    • CE-conformity for plastic and rubber vapour control layer (EN 13984)

    • Limited vapour transmission

    • Airtightness and water resistance

    • Superior mechanical strength

    • Light weight – making it easy to install

    • BBA-Approved

    DuPont™ Typar® spunbond & Ethylen Butylacrylate Copolymer
    Roll Size:
    1.5 m x 50 m
    Roll Weight:
    8.5 kg
    Mass Per Unit Area:
    108 g/m2
    0.05 (A low emissivity value = high reflectivity = superior thermal performance which boosts your thermal insulation)
    Water Vapour Transmission:
    (Sd) 2 m
    BBA Certificates:
    08/4548 and 90/2548
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products