DuPont™ AirGuard® Control
DuPont™ AirGuard® Control
Description
DuPont™ AirGuard® Control is designed to reduce uncontrolled air leakage and minimise convective heat loss in roofs, walls and floors.
A continuous layer of DuPont™ AirGuard® Control reduces air leakage by providing an effective vapour control barrier to control air movement and moisture infiltration around the habitable space of the building.
What the experts have to say
Wall Connection:
First ceiling then wall membrane
Place the membrane against the ceiling, allowing a 100mm lap onto/down the adjacent walls.
Remove the release liner from the tape and press the membrane firmly into place.
Fold the membrane in the corner, do not cut off the fold.
Reduced convective heat losses
Reduced risk of condensation in the insulation
Transparency for easier installation of insulation
Reaction to Fire: Class E
CE-conformity for plastic and rubber vapour control layer (EN 13984)
Limited vapour transmission
Airtightness and water resistance
Superior mechanical strength
Light weight – making it easy to install
BBA-Approved
Composition:
DuPont™ Typar® spunbond & Ethylen Butylacrylate Copolymer
Roll Size:
1.5 m x 50 m
Roll Weight:
8.5 kg
Mass Per Unit Area:
108 g/m2
Emissivity:
0.05 (A low emissivity value = high reflectivity = superior thermal performance which boosts your thermal insulation)
Water Vapour Transmission:
(Sd) 2 m
BBA Certificates:
08/4548 and 90/2548
Full Information:
Check out the full datasheet available in the Downloads section!
