|   

Unilin Insulation FR/MG

Unilin Insulation FR/MG

Description

Single Ply Fully Adhered Partially Bonded Built-Up Felt Systems
Flat Roof MG is a high performance
Polyisocyanurate with mineral coated glass facers suitable for use below single ply fully adhered or partially bonded built up felt systems.
Make an enquiry


    What the experts have to say

    Fully Adhered
    Systems
    Unilin Insulation FR/MG is suitable for use with most fully adhered single–ply waterproofing membranes. Board joints and abutments should be taped subject to the approved adhesive system being used. A fleeced backed membrane might be required with the system being used, check with the system manufacturer.
    Categories: , ,

    • Compatible with adhesively bonded single ply roofing membranes laid on mechanically fixed boards

    • Compatible with most green roof systems

    • Closed cell structure – moisture resistant

    • FM Approval

    • Easy to Install

    • High Thermal Performance Rigid Insulation

    • Suitable for new build and refurbishment

    • Non-deleterious material

    • High Compressive Strength

    Density (Foam Core):
    32kg/m3
    Compressive Strength:
    >150kPa@10% Compression
    Water Vapour Resistivity:
    >100MNs/gm
    BBA Certified Thermal conductivity range:
    0.024 – 0.026 W/mK
    Facings:
    Mineral Glass Coated Facings
    Core:
    Rigid PIR Foam
    Board size:

    1200mm x 600mm

    1200mm x 1200mm

    Board Profile:
    Square Edge
    Full Information:
    Check out the full datasheet available in the Downloads section!
    Unilin Insulation FR/MG - Technical Datasheet
    Download
    Unilin Insulation FR/MG - DOP
    Download
    Unilin Insulation FR/MG - BBA Product Sheet
    Download



    Related Products

    Related products