| PREVNEXT
Tremco SF115 Contact Adhesive – Rubber & PVC
Tremco SF115 Contact Adhesive – Rubber & PVC
![Tremco SF115 Contact Adhesive – Rubber & PVC](https://laydex.ie/wp-content/uploads/2016/04/tremco.jpg)
Description
SF115 is a one part, modified elastomer contact adhesive for use with rubber and PVC. SF115 has been specially developed for contact bonding (two way stick) of a wide range of floor coverings including: rubber tiles and sheet, vinyl and cork.
![](https://laydex.ie/wp-content/uploads/2016/07/support.png)
Extra strong bond
Suitable for the widest range of floor coverings
Extended working life
![](https://laydex.ie/wp-content/uploads/2016/07/service4.png)
Fast drying but long ‘open time’
The dry bond does not support combustion
Composition:
A modified chloroprene elastomer dissolved in a blend of flammable solvents
Specific Gravity:
0.82 - 0.86
Flash Point:
Below -18°C
Application Temperature Range:
+4°C to +30°C
Service Temperature:
-20°C to +85°C
Coverage:
2.5 - 3 m² of bonded area per litre
Dry Tack Time:
Up to 40 minutes after becoming touch dry
Drying Time:
5 to 45 minutes
Final Bond Strength:
36 to 48 hours
Storage:
Store between +5°C and +27°C
Shelf Life:
12 months from manufacturing date, when stored as recommended in original unopened containers
Full Information:
Check out the full datasheet available in the Downloads section!