Nullifire FF177 PU Foam
Nullifire FF177 PU Foam
Description
FF177 is a modified, single component, fire rated polyurethane foam. FF177 is used to seal linear gaps.
What the experts have to say
Preparation
FF177 PU Foam
Always carry out a test to confirm compatibility prior to use. Protect floor coverings with paper or a plastic film. The surfaces must be dry, solid, stable and capable of carrying the load of the panels to be installed. Remove all loose particles, dust and grease. A speedier cure can be attained by moistening the substrates if needed.
Certified to the latest British and European standards EN 1366-4, DIN 4102 Pt 1 (B1) and EN 13501: Pt 2
Features the patented ergonomic cap system for ease-of-use, improved yield and accurate dosage during application
Acts as an effective fire seal for up to 4 hours (BS EN 1366-4) when used with FS701 intumescent acrylic or FS703 silicone sealant
Classification:
DIN4102: Part 1 B1
Fire Performance:
Up to 4 hours
Density:
30 - 40 kg/m3
Thermal Conductivity:
36 mW/m.K
Tack Free Time:
10 minutes
Cutting Time:
60 minutes
Loading Time:
24 hours
Tensile Strength:
103 kPa
Shear Strength:
80 kPa
Temperature Resistance:
Short Term: -40°C to +130°C , Long Term: -40°C to +90°C
Full Information:
Check out the full datasheet available in the Downloads section!
