Illbruck ME904 Primer

Illbruck ME904 Primer


ME904 is used for the pre-treatment of building substrates, e.g. cement particle board, masonry, timber, etc., when using illbruck building protection tapes, particularly for bonding to damp substrates.

Make an enquiry

    What the experts have to say

    Internal & External Walls
    Application: The surface should be dry, and free from dust and grease. Remove concrete and cement residues. If required, protect adjacent surfaces with masking tape. Apply evenly and carefully onto the surface using a brush. After use, ensure the tin is firmly closed. Adhesion and drying time is dependent on the weather. If unsure, carry out a preliminary adhesion test.
    • Acrylic copolymer primer

    • Stabilisation of the surface

    • Short drying time

    • Allows use of illbruck building protection tapes in damp conditions

    • Solvent free

    • Optimises adhesion

    1L tin
    Based on polyvinyl acetate - water based system (dispersion)
    Drying Time:
    10 to 40 minutes (depending on porosity / relative humidity)
    Consumption per Litre:
    Approximately 6-8 m² (depending on surface)
    Store in dry, protected conditions between +5°C and +30°C. Protect from frost
    Shelf Life:
    12 months when stored as recommended in original, unopened containers
    Full Information:
    Check out the full datasheet available in the Downloads section!

    Related Products