Show categories
- Air & Weather Tightness
- Building Products
- Adhesives
- Artificial Grass
- Breather Membranes
- Building Products
- Cleaners
- Composite Decking Boards
- Corriboard Protection Boards
- DPC & DPM
- Drives & Pathways Solutions
- Expanding Foams
- Fibre Cement & Tile Backer Boards
- Floor Levelling Compounds
- Fortessa Door Handles & Accessories
- Handrail
- Impact Sound Insulation
- Joint Compounds
- Loft Ladders
- Meter Boxes
- Oxide Paint
- Personal Protective Equipment
- Radon & Gas Protection
- Roofing & Bituminous Products
- Shelving
- Silicones & Sealants
- STEGU Decorative Stone
- Tapes
- Tile Adhesives & Grouts
- Tile Trims & Tools
- Torch On Membranes
- Tube & Fittings
- Tyvek® Building Envelope Solutions
- Underslating
- Flooring
- Acoustic Floors
- Adhesives, Screeds & DPMs
- Artificial Grass
- Carpet Tiles
- Ceramics
- Commercial Carpet
- Commercial Vinyl
- Floor Repairs
- Flooring Tools & Accessories
- Impact Sound & Vibration Insulation
- Linoleum
- Luxury Vinyl Tiles
- Rubber Flooring
- Safety Floors
- Sports Flooring – Indoor
- Static Control Flooring
- Wallcoverings
- Wetroom Solutions
- Passive Fire Protection
- Roofing
- Balcony Accessories
- Bituminous Membrane Roofing Systems
- Bituminous Roofing Felts
- Cold Applied Liquid Waterproofing Systems
- EPDM Membranes
- Green Roof Systems
- High Performance Vapour Barriers
- Hot Melt
- Hybrid Liquid Waterproofing Membranes
- Insulation
- Roof Coatings
- Roofing Accessories
- Single Ply Membranes
- Single Ply PVC Membranes
- Single Ply RESITRIX Hybrid Membranes
- Standing Seam Systems
Showing the single result
-
Illbruck ME904 Primer
REF:REF:Description
ME904 is used for the pre-treatment of building substrates, e.g. cement particle board, masonry, timber, etc., when using illbruck building protection tapes, particularly for bonding to damp substrates.What the experts have to say
Usage:Internal & External WallsApplication: The surface should be dry, and free from dust and grease. Remove concrete and cement residues. If required, protect adjacent surfaces with masking tape. Apply evenly and carefully onto the surface using a brush. After use, ensure the tin is firmly closed. Adhesion and drying time is dependent on the weather. If unsure, carry out a preliminary adhesion test.